HTTPS "Not Secure"

[bradleythomasthornton_579789494964573]

Today I become unable to locally access my NVR via LAN and when I turned HTTPS on in server settings I was able to access the NVR again, however I am being presented with a "Invalid certificate" warning.

Does anyone have any insight to what this is about?

[joseph_1979]

@bradleythomasthornton_579789494964573 When you changed the server to HTTPS, it’s telling the browser to connect via a different port (443 – HTTPS), whereas normally, you connect via (80 – HTTP). Without an SSL Certificate (exchanged during handshake), the server would refuse the connection. So, in short words, HTTPS is simply not possible without a certificate which encrypts the communication between the NVR and the browser. So previously you were connecting to NVR using HTTP and all of a sudden you were not able. And when you enabled HTTPS then you were able to access. I think when you use HTTPS there was a redirect 301 and connected to HTTP and you got that message.

[Crimp On_62210811129]

Modern web browsers complain about any SSL certificate that is not properly "signed" by a recognized certificate authority. Companies who enable https (encrypted) web browsing often include an SSL certificate that is "self-signed", and web browsers throw a fit. (maybe not the correct technical term).

Just ignore the warning and proceed to the NVR web site. The next time, that web browser should remember and not show the warning.

[Hainz74]

Hello,

I have a RLN8-410 (HW-vers N7MB01). I wanted to show my 3 PoE-Cameras in Home-Assistant. Everything seem working fine and i got a message to update my NVR.

So I downloaded the Pak-File (NT98331_NVR_8IP_REOLINK_L300_282_23103128.pak) and did the update, but it won´t finish it with a message ´done`.

I havn´t left the screen! I checked with my smartphone connection to NVR and it works fine.


So i tryed to reaccess by entering local IP. GUI-login appears with a warning that it is not secure - but there is no option to ignore this message. Network is still not available.

Fehlercode: SEC_ERROR_REUSED_ISSUER_AND_SERIAL


Fehlercode: SEC_ERROR_REUSED_ISSUER_AND_SERIAL

This problem is only at my laptop. Smartphone works still fine and ping to xxx.21 is about 3ms without loosing data.

I checked secury settings of my browser (firefox) but I think, i have to delet the old certificat to avoid further problems. Does anybody can give me a hint how to solve this problem?

Does anybody can give a hint how to fix this Problem?

[joseph_1979]

@hainz74 After update it could be that https is not enabled. Go to network and check it out.

Follow this https://support.reolink.com/hc/en-us/articles/900004435763-How-to-Set-up-Reolink-Ports-Settings-via-Reolink-Client/

[Ben L_363180304232580]

FTR, this is a Reolink bug: community.reolink.com/post/36425

[joseph_1979]

@ben-l_363180304232580 yes. Email support on support @ reolink . Com