-
Hello. I just installed a Flood Light and linked it to my TrackMix camera.
I could create a rule so that the flood light turns on when the camera detects a person, but apparently that also triggers during daylight.
Isn't there a way to create a rule like "IF a person is detected AND the camera is in night mode THEN switch on flood light" ?Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@seb_526812765704330 Would the floodlight switch on when you walk across its PIR during daylight? If yes then email Reolink support to send you a newer firmware of the floodlight and you should be able to adjust the ambient light when the floodlight should switch on.
-
@joseph-chircop_497308027822318
During daylight, the flood light doesn't come on when not linked to a camera.
It's just when linking it, the only option available is to react to a detection event (person for instance), regardless of ambient light it seems.
Current firmware for light is 3.0.0.1311_22090741
-
Contacted support, and apparently there's no option to do that
Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@seb_526812765704330 I have informed them too. If I have the source code ( I program in C++) I will also add the schedule when it is triggered by motion or cameras. few lines of coding..... It doesn't make sense to switch on the floodlight at daylight.
Flood Light linked to Camera switching on during daylight
-
Hello. I just installed a Flood Light and linked it to my TrackMix camera.
I could create a rule so that the flood light turns on when the camera detects a person, but apparently that also triggers during daylight.
Isn't there a way to create a rule like "IF a person is detected AND the camera is in night mode THEN switch on flood light" ? -
Contacted support, and apparently there's no option to do that
All Categories