@ginny
Thank you, very interesting.
I came up to similar conclusions while doing my own setup. I ended up adding a PoE switch to connect all cameras and the NVR, which links back to my main router on a dedicated VLAN.
Definitely noticed some firmware features are more advanced on the cameras directly rather than through NVR

Hello. I just received my E1 Zoom with person/pet detection and auto tracking (very nice piece of kit).
I noticed the tracking seem to be only horizontal and not vertical like the Trackmix.
Is that normal ? If so any plan to have vertical tracking as well in future firmware ?

@joseph-chircop_497308027822318
thank you, yes it should be ok for my setup.
But surely, there's an overall limit to the "25W per port" as I don't believe it will would be able to provide 16x25=400W of power should everything be maxed out. I assume the overall power budget is somewhere around 100W (it's more for curiosity here, in case I have to extend the setup one day)

Any information on the maximum PoE power the RLN16 can provide ?

Hello
I’m planning to build a system with a Trackmix, 2 RLC-811A, a video doorbell, and a floodlight, all connected with PoE to the NVR. Will the PoE budget be enough or should I consider injectors or PoE switch ?

thanks

thanks for the confirmation. I just can't find where on the site to buy individual chime

Hi. Is there a possibility to add a second chime to the video doorbell ? (if I want one downstairs and one upstairs)
Also, can they be bought separately ?

I noticed the same on my cameras.
I thought for a while that the solar panel was always topping up, but then one day the charge level started to go down slowly. When it reached about 75%, I unplugged the solar panel as I wanted to recharge it, and the battery indicator dropped down to about 50%.

With the Argus Pro 3 (or others), it would be nice when receiving a motion notification to be able to have a quick preview of what triggered it with long press on the notification, as it usually takes too long when away from home to wait for the live stream to kick in for a quick check.
Just seeing a still picture for instance, or maybe several (animated preview).

I understand it won't be running on battery as an option ? (I don't have power where the doorbell is)