Scene Mode

[Coded_767658540007646]

In scene mode I am only able to adjust settings for my NVR but not the individual cameras.
Is there some setting I need to adjust or is the software just not as good as it should be?

Thanks

[joseph_1979]

@coded_767658540007646 In order to extend the scene mode to the cameras, you need to have direct access to the cameras from the Android client. To have this setup, you need to connect the cameras through a POE switch (if you have POE cams) and from here to the NVR and BB router.

[mechanics200_57936638379]

@joseph_1979 I have multiple wifi cameras and have used two different scenes fine until a recent app update. I still have the old app on
two old cell phones and scenes work fine on them. There have been multiple emails to Reolink support with them blaming everything except their app updates. I just received a link from them with another app update to try. Hope it corrects their problem. Also I heard the scene setups are called shortcuts. Cameras have been fine until recently the plastic knurled covers on the attaching end of wifi antennas have cracked. Thus when I attempted to replace the antennas the plastic knurled cover will turn but not the metal receptical connecting the antenna. Reolink has been no help to the six antennas with the problem.

[joseph_1979]

@mechanics200_57936638379 I always tell them to add more resources in testing both the fw and clients. I used the scene mode in the past but no longer. I asked for the status and a scheduler.

As for the antenna, if not available in Reolink store then check out Amazon. The connector is standard.

[rlmcculley_786860814041236]

I am having the same issue, what can I do to see all camera's instead of just the NVR when selecting scenes? I could not see the answer posted to the original author on this topic.

[joseph_1979]

@rlmcculley_786860814041236 You need to connect the cameras through a switch and access them directly.