RLC-843A Resolution changing

[user_800031703249048_800031703249048]

Hi guys,

I have bought an rlc-843A camera. The issue is that I put it on the highest resolution, it goes wel for 1 day and in the morning it is always on the lowest resolution and then the fov is terrible(like zoomed in) I am getting tired of having to change the resolution every morning..

Why does this happen, and what can I do about it..?

[joseph_1979]

@user_800031703249048_800031703249048 Check if you have auto reboot (from Windows client ...system/maintenance) daily at 02:00am? If yes then disable it and check again.

[user_800031703249048_800031703249048]

@joseph_1979
i disabled that option, it was only reboot every Sunday night at 2. Anyways still have the same issue.

[joseph_1979]

@user_800031703249048_800031703249048 Are you connecting from the same network or an external network? I guess you have the most updated client and fw.

[user_800031703249048_800031703249048]

@joseph_1979

same network firmware everything is fully up to date. I don’t get why the Reolink goes to a low resolution every night/morning.. it’s so annoying and I wanna keep the camera but is not a workable situation.

[joseph_1979]

@user_800031703249048_800031703249048 if the camera and PC are on the same network, this should not happen. If external you will experience it.

I suggest you to email support on support @ reolink . Com (delete spaces)

[user_901471950926075_901471950926075]

if the camera and PC are on the same network, this should not happen. If external you will experience it.

I have the same issue with my RLC-843A, perhaps I often connect to it from a different network. Is there a workaround for this problem?