What type of screws I can use to mount my Reolink camera to junction box d20?

[Reolink System_824158258282663]

I've got long screws included in the package but it seems that it is not the right screws

[Chopstix]

@reolink-system_824158258282663 That is a VERY broad question. Your installation specifics will dictate what screws to use. Camera to D20? Which camera? D20 to wall? If the ones that came with it are simply too long, take one to a hardware store and ask them if they carry a shorter one.

[Crimp On_62210811129]

I had assumed that screws packaged with the junction box are used to secure the junction box to the building and the screws included with the camera would be used to secure the camera to the junction box. It appears to be designed to accept MANY different camera models (the letters A, B, C... etc. should "line up" with the mounting holes in different cameras).

[Reolink System_824158258282663]

@crimp-on_62210811129
hi,

I'm pertaining to the screws to mount it on the face plate of the junction box. I thought it was included in the package of the camera but unfortunately not. Any advice to what screw type is it like the photo below?

[Chopstix]

@reolink-system_824158258282663 my recommendation is to take the camera and D20 plate to a hardware store and ask a knowledgeable clerk for assistance. You will want stainless steel machine screws with washers and nylon locking nuts to attach the camera. Alternatively, you may use stainless steel self-tapping sheet metal screws. A knowledgeable store clerk should be able to advise you.