RLC-410 POE schedule

bigskye

I only want this camera to react to motion during night hours, and it's set as that now, but all day it creates stills and videos to memory. Is there some other settings?

Crimp On

The Windows Client has a tab for Network Advanced Settings. There are options to set the "schedule" under email, FTP, etc. etc. Also, one could put the sensitivity down to 1 for the hours when no recording is wanted and that would eliminate almost everything.

bigskye

Thanks for that tip. As of the time that I disabled FTP for the daylight period, along with the desensitizing, the videos have stopped. You may have answered this question.

Cynthia

Hi, except for the sensitivity setting, you may also exclude the time during which you don't want the camera to record from the recording schedule: https://reolink.com/topic/rlc-410-poe-schedule/

bigskye

That is the way I had it, only detect and record motion between 6pm and 6 am, but was still getting detects all day. Adjusting daytime sensitivity to lowest has eliminated them.
I use this camera to monitor wildlife visiting our yard, but also get lots of video of falling or swirling snow.