-
I've just picked up a new Go PT Plus and it's been a bit hit and miss with motion detection. I'm running firmware version v3.0.0.634_21092700. I literally drove my car past the camera and it didn't detect it or record it. I checked the sensitivity and increased it from 80 and it's been better at 100%, but not to an acceptable standard. It also missed some kids trespassing. It detected during, but not when they entered or left. Am I missing something?
I believe there is a new firmware version that I've requested, but wanted to know if there is a feature like Ubiquiti have that when the motion is detected, you can include the previous 15, 30 or 1min prior to the event occuring. If there is not, is this something being considered?Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@Percy_548115457614016
Because the GO PT Plus is the battery camera, the camera will be activated when it detects the motions. So it is not possible for the pre-moton recording now. When it is in active mode, it can record the pre-motions. -
@reolink-fiona thanks for your feedback. Is it possible to have another option to include up to
2mins for additional recording after detection? User selectable?
-
Facts like these could be a deal-breaker for some.. This should at least be mentioned on the product's description.
Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@jani_472826784014531
This applies to all battery and PIR sensor based cameras across all brands. That's why I switched to PoE cameras.
Pre Motion Recording
-
I've just picked up a new Go PT Plus and it's been a bit hit and miss with motion detection. I'm running firmware version v3.0.0.634_21092700. I literally drove my car past the camera and it didn't detect it or record it. I checked the sensitivity and increased it from 80 and it's been better at 100%, but not to an acceptable standard. It also missed some kids trespassing. It detected during, but not when they entered or left. Am I missing something?
I believe there is a new firmware version that I've requested, but wanted to know if there is a feature like Ubiquiti have that when the motion is detected, you can include the previous 15, 30 or 1min prior to the event occuring. If there is not, is this something being considered? -
Facts like these could be a deal-breaker for some.. This should at least be mentioned on the product's description.