ReoLink Web Interface Port Forward?

[jimbrown.net]

So I was able to use the ReoLink Web Interface via Port Forward on Firmware NT98312_NVR_8IP_REOLINK_L300_114_21011922.pak below Screenshot but when I upgraded to Firmware NT98312_NVR_8IP_REOLINK_L300_214_22120247.pak or NT98312_NVR_8IP_REOLINK_L300_200_22081548.pak I get the error show below. screenshot2, thoughts?  
 
Firmware NT98312_NVR_8IP_REOLINK_L300_114_21011922.pak


Firmware NT98312_NVR_8IP_REOLINK_L300_214_22120247.pak  


Asus Port Forward but nothing changed between Firmware

[Reolink Fiona]

@jim_113753456251131 Try to enable the network port. Path: PC Client->camera settings->network->advanced->port setting

[user_638337673601072_638337673601072]

All you need is a correct IP camera address and type it in the web browser address bar, that's it. However, if you want to view live streaming of your IP cameras in external Internet, you need to configure IP camera port forwarding.

[jimbrown.net]

Fixed, it appears that the firmware upgrade turned off HTTP, Turned back on fixed issue.


Reolink Support Team (Reolink)
Dec 9, 2022, 18:52 GMT+8
Dear Jim,
 
Sorry for the late reply!
 
Please find the IP address of the NVR and then access the NVR via the web browser in LAN, in the web browser you will find the port settings. Then please check if the HTTP port is enabled.
 

[joseph_1979]

@jim_113753456251131 Good. When I read it I immediately thought of HTTP/S being restricted from cam side.