Switch resolution via API

[das-dos_208145718501556]

Hi!
I have a RLC-823A 16x and would like to change the resolution of the cam via API call (curl comand within linux script)
The API I am already using for making snapshots, but I do not know the API command for a resolution change.
Is this possible?

[Reolink Lorenz]

@das-dos_208145718501556 Hello there, you can switch resolution via API command listed below. Note that with camera resolution changed, the camera will restart and work again after restart.

[{
    "cmd": "SetEnc",
    "action": 0,
    "param": {
        "Enc": {
            "audio": 0,
            "channel": 0,
            "mainStream": {
                "size": "2560*1920"
            },
            "subStream": {
                "size": "640*480"
            }
        }
    }
}]

[joseph_1979]

@das-dos_208145718501556 According the API v8 the following parameters are mandatory in command SetEnc.




And so the curl command should be as follows.

curl -s -k -X POST -H "Content-Type : application/json" -d "[{\"cmd": \"SetEnc\",\"action\": 0,\"param\": {\"Enc\": {\"channel\": 0,\"audio\": 1,\"mainStream\": {\"size\": \"2560*1920\",\"frameRate\": 20,\"bitRate\": 4096,\"profile\": \"High\"},\"subStream\": {\"size\": \"640*480\",\"frameRate\": 10,\"bitRate\": 256,\"profile\": \"High\"}}}" "https://#IP#/cgi-bin/api.cgi?cmd=SetEnc&user=#username#&password=#passwd#"

Please replace the IP with the cam IP and the username and passwd with your credentials.

And if it doesn't reboot you can reboot it using

curl -s -k -X POST -H "Content-Type : application/json" -d "[{\"cmd\":\"Reboot\",\"action\":0,\"param\":{}}]" "https://#IP#/cgi-bin/api.cgi?cmd=Reboot&user=#username#&password=#passwd#"