@reolink-lorenz
Thanks for feedback, looking forward to Android Auto support.

Best posts made by Gsxr38
-
RE: Mobile app and Android auto
-
RE: Overexposed image. Unable to see anything during the
Hello,
I have exactly the same conclusion as you on the RLC-820A and RLC-822A models.
I leave on 60 Hz and everything is correct.
Other parameter change.
From "Camera" -> "Display" -> "Advenced" -> "Backlight"
I changed the "Backlight" parameter to "Dynamic Range" and 85.
i have better night vision like this.
Bye -
Mobile app and Android auto
Hello,
I have a Volkswagen T-Roc with Android Auto system and a OnePlus 8T.
All software versions of car, phone and Reolink are up to date.
I connect my mobile to the car via Bluetooth and I can use Waze, Maps, etc...
But if the alarm activates (push) on the Reolink app, I have no sound, no notification on car, nothing.
The notification is just on the phone screen.
If I unplug the phone from the car, I get the sound alert.
It's a big problem because I'm not warned in case of detection when I'm driving.
Do you have this problem?
Thank you in advance for your answers.
Latest posts made by Gsxr38
-
RE: V4.29.06 Bug et request
@reolink-fiona
Hello Fiona,
I'm waiting for the bug fix.
I have my camera connected to the NVR which is in version 159 and I can set the alarms well with the siren.
I'm talking about the activation or deactivation scenario (scene mode)
https://support.reolink.com/hc/en-us/articles/360026049414-What-is-Scene-Mode-and-How-to-Set-the-Scene-Mode-for-Your-Cameras-on-Reolink-App
Best regards,
Pierre -
V4.29.06 Bug et request
Hello,
Bug:
Since Android version V4.29.06, push alerts no longer trigger the notification sound on my OnePlus 8T (Android V11).
There is a notification and an email but no sound.
If we change in the settings -> Notification sound -> Light / Loud or default, the sound is produced.
Can you fix this ASAP.
Request:
Since this version, it is possible for the RLC-811A camera to trigger the siren based on a detection.
This is perfect and corresponds to one of my old requests.
But it is not possible to create a scenario that activates/deactivates this option.
The audio alarm is only the beep from the NVR.
Thank you in advance for your response.
Best Regards
Pierre -
RE: Mobile app and Android auto
@reolink-lorenz
Thanks for feedback, looking forward to Android Auto support. -
Mobile app and Android auto
Hello,
I have a Volkswagen T-Roc with Android Auto system and a OnePlus 8T.
All software versions of car, phone and Reolink are up to date.
I connect my mobile to the car via Bluetooth and I can use Waze, Maps, etc...
But if the alarm activates (push) on the Reolink app, I have no sound, no notification on car, nothing.
The notification is just on the phone screen.
If I unplug the phone from the car, I get the sound alert.
It's a big problem because I'm not warned in case of detection when I'm driving.
Do you have this problem?
Thank you in advance for your answers. -
RE: Overexposed image. Unable to see anything during the
Hello,
I have exactly the same conclusion as you on the RLC-820A and RLC-822A models.
I leave on 60 Hz and everything is correct.
Other parameter change.
From "Camera" -> "Display" -> "Advenced" -> "Backlight"
I changed the "Backlight" parameter to "Dynamic Range" and 85.
i have better night vision like this.
Bye -
RE: How to delete forum topic
Hello,
Also have the possibilities:
To unsubscribe from a subject to no longer receive emails.
Have the list of posts we have opened in your profile.
To modify his post in case of error.
Thank you -
RE: [NVR V3.0.0.118] Incomplete system shutdown
Hello,
It must be said that it is a little technical and it is necessary to analyze the network frames with WireShark or tcpdump.
This is not a priority but a little test from R&D would be appreciated.
PS: it is a pity that we cannot modify a post to mark Solved.
Greetings. -
RE: [NVR V3.0.0.118] Incomplete system shutdown
very well, I take note.
thank you. -
RE: [NVR 3.0.0.118] Broadcast problem ?
I understand the auto add function well.
what seems to me to be a bug and a network overload is that udp broadcast frames continue to be emitted by the nvr after disabling this function. -
RE: [NVR 3.0.0.118 Web App] NTP setting problem
Hello,
i mean it is possible to grab a custom ntp server through windows client.
but the web client on the nvr does not display it.
See the pictures.
an NTP server is defined (192.168.x.x), screen image on the French Windows client.
On the English image of the web client, we see the empty combobox.