The software has the the same Model version as the beta version.

you can not upgrade a camera with this software if the beta version has been installed before.

The camera is telling you that it is the same version.

have a nice day.

Will this doorbell camera have
SIP interface
a possibilty to open the door by a code?

have a nice day

A 4K PTZ outdoor camera with a integrated Powerline POE and powersupply would be awfull.

Until now i use a Abus Powerline POE Adapter on one of my 4K camera.
No WLAN and no ethernet network is possible at this place.

Other brands for an indoor example , do a google search

" SEC-CAMIP40 " or D-Link DCS-6045LKT/E




have a nice day

@reolink-lorenz

using https in the Snap url works but it is first blocked by Kaspersky because you use a self signed CA root certificate and not not signed by a publicly trusted certificate authority signed CA certificate in the firmware.

This make no sense.
the webbrowser and Kaspersky will first block the Snap capture everytime until you have given the clicked the OK.

you have to include a authority signed CA certificate in the firmware.

Disadvantages of a Self-Signed SSL Certificate

• No browsers and operating systems trust self-signed certificates.
• The browsers will not show visual indicators of trust like a padlock symbol and HTTPS in front of the domain name.
• Snapshot captured in this way have to proceed through a security warning page with error messages like “error_self_signed_cert” or “sec_error_untrusted_issuer” or “err_cert_authority_invalid” to access your content.
• This means that you must manually click on the ”Accept Risk” button to capture the snapshot.

@reolink-lorenz

FTP works as well as FTPS.
this funstion will not work.
example:
1. Snap a picture of the ipc device
http://192.168.123.145/cgi-bin/api.cgi?cmd=Snap&channel=0&width=640&height=360&rs=000000&user=admin&password=xxxx


Kaspersky internet security is installed.

Snap URL function out of service with this software.

I have installed the v3.1.0.764（beta）firmware on my 3 RLC 811A cameras

The Snap URL function does not work. you will get the main login page. and you are asked to put the user name and the password.

when downgraded to the old version it is OK again.

I testted my RLC 810 cameras with v3.1.0.764_21121703 firware to. They have the same behavier.