Posts made by SandyDE

Okay, I understand, but I don't know what to so.

I get a lot of false alarms at night, but I can't see any movement on the alarmvideos. Sensitivity is 23.
It seems camera reacts to very small movements. The contradiction: Camera does not always recognize all movements or movement of people. A person is walking and no alarm is triggered (movement or person). It doesn't seem to recognize large objects. Too many alarms with no detectable movement vs. no alarm for large objects like people.

And now?

OK, that's very bad.

The camera does not reliably detect all movements at night. People who are 3-5m away are not recognized. However, the RLC810 in the same position recognizes them.
But on the other hand, I have an extremely large number of false alarms at night, there is no recognizable movement at all. The camera is useless like this. Any ideas?

Hello,

where can I find firmware for Reolink Duo PoE?

Thanks.

Okay, I will test it.

But AlarmDelay only for person and car, I am sceptical

• Chime inside the house
• Chime outside the house (garden...)
• possible more than 1 Chime
• display/screen inside the house

Hello Fiona,

thanks for your help.

Do you mean the version 3.0.0.494 or the beta version 3.1.0.764?

I can't find the Alarm delay feature @494 or what do you mean withe this function?

Thank you.

Hello,

everyday i get alarms, if the lights turn on or off.

There are a solution?

I use a RLC810A

Thx for Help.