1. Home
  2. Discussion About Products


  • Hi I'm a total newbie and I want to install a Reolink 420 on the outside corner of my house. I'm confused about what I need besides the camera. Do I need some sort of poe device too? How is it all hooked up? I tried to find a guide but it's confusing. Here's what I want to accomplish: I want it t
    | Guest
    0
    2


  • I just got a rlc-423 and set it up. I can get it to work very well using the supplied 12v DC input but when I try using Poe nothing happens. I'm using a " PIXNOR DC 48V 0.5A POE Injector Power Supply Over Ethernet Adapter with UK Plug for 12V 24V 48V POE Device" from Amazon which plugs in directly t
    | stephen1_39356197801
    0
    15


  • Hi, Why is my Ethernet port throughput reported at constant 0 KB/s on my Reolink RLC-410S? I am seeing this by accessing the webpage of the ipc. Selection_114-2.jpg
    | FongJeng Kum_34673838378
    0
    2


  • What is the "FTP Postpone" option exactly doing? This is not explained at all in the manual. FTP-Postpone.png
    | Guest
    0
    5


  • Hello all, I have been having an issue with both my Reolink RLC-410 camera, both seem to be stuttery at times. Both camera are the same in terms of stuttering. Settings: Stream Type: Clear Resolution: 2560 x 1440 Frame Rate: 30 Maximum Bitrate: 8192 H.264 profile : High Antiflicker: Off Ex
    | Noble_20690050057
    0
    8


  • Hi, I am using Reolink RLC-410S and I am using the web interface of the camera to view live streaming on my Chrome browser. But I am getting video stuttering when viewing on Clear mode with 2560x1440, 8192bit rate, 25fps. Why is that? Also can I know why there is only up to 25fps option to choose
    | FongJeng Kum_34673838378
    0
    4


  • So I just got the RLC-410 today and was all excited to set it up. Once I got it all configured I noticed a major problem with it. If the camera detects any motion, the camera makes this really loud click/chirp noise - and then the camera stops recording for about 20 seconds. What in the eff.... I ac
    | Guest
    0
    3


  • I see other people are using a Reolink 410 for Weather Undergound. I think I have the FTP set up properly, but it is not working. Could someone give me a brief tutorial on how to do it?
    | Guest
    0
    6


  • Is there a fixed rate that an RLC-410 and RLC-422 send MPEG key frames at? If so, is it at all possible to add an option to change it? Also, is there a way to force TCP over UDP? This would go a long way in terms of eliminating the last bit of smearing with ZoneMinder.
    | Guest
    0
    1


  • I cannot access the allen screw in order to make adjustments because the antenna post is BLOCKING. See attached picture. Any suggestions...?? IMG_0164-small.jpg
    | sigma_34060783854
    0
    3


  • When I first got this camera, it had a strange TINT issue. Everything is in purple. Mainly anything GREEN is in PURPLE color. I believe it updated the firmware at the time, and it corrected it. Now, I just updated to the latest firmware. And I am back to the PURPLE TINT color on anything GREEN. So
    | Guest
    0
    2


  • I have a 16 channel NVR with several RLC-410s cams. Whats the maximum feet i can run Cat6 ethernet cable and have the cams work? Is there a recommended POE switch or POE injector for long runs when using the NVR? I'm assuming for my runs of about 100 feet plus i need something like this? BV-TECH 8
    | davidpcrepair4_33770877130
    0
    3


  • With your software I cannot name the file name that will be uploaded to a web site. This is very important as the file(single photo) need to be overwritten on the web site. This limits this camera and your software, making me purchase a third party software and run my computer 24/7. This is not impo
    | Keys_33832616146
    0
    1


  • Just recently installed a RLC-410WS camera at my business and it mostly works great. Unfortunately the camera position is near the limit of my WiFi range which causes a very unstable connection. I'm wondering if there is an option to disable the WiFi and connect over a wired connection. I currently
    | Guest
    0
    2


  • I'm looking to upgrade two of my bullet (410s) to RLC-423 cameras, but I could not locate them in the US Amazon store like other Reolink equipment. I could only find the vertical mount for this camera. Is this camera one that can only be purchased directly from the Reolink site? Maybe I will wait f
    | Guest
    0
    2


  • Yesterday morning I received the email from Reolink for the new Argus play and say program. I immediately went to the site and attempted to sign up, however, every time I finished and clicked submit, it would get hung up on processing.
    | npcarling26_28371092250
    0
    2


  • Hi all. Just got my C2. I love it. For my application, I needed the camera mounted high in my living room, and wanted more downloads PTZ mobility, so I mounted the camera upside down and mirrored and rotated the image so that the orientation is right. This worked perfectly except for one major issu
    | npcarling26_28371092250
    0
    3


  • So I am thinking about getting 2 C2 cameras for inside my home and 3 RLC-411WS for outside my house. I was going to set them to record constantly. I was looking to maybe find a company to record to the cloud instead of locally to the NVR. Just curious how much data would those 5 cameras consume on a
    | Guest
    0
    5


  • I would like to see smart ir on the c2 I just purchased because with ir lights on at night your face will be washed out (all white)and prevent camera from getting a good facial recognition shot, add a iris sensitivity adj scale so camera will lower light level like when an outdoor motion floodlight
    | Guest
    0
    2


  • Hello, I have a RLC-410 which is advertised as being a 4MP model. However when the device is opened, you can see that the camera is marked as only 3MP. What gives ? Also, a mouse chewed through the cabling that is attached to the camera, am I able to get a replacement ? camera-Copy.jpg
    | ilikecheese_31643776001
    0
    4

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now