1. Home
  2. Discussion About Products


  • I have updated several of my cameras with Reolink models and am quite happy with them. I have small indoor ONVIF cameras that I can't replace with Reolink ones because they are small inconspicuous shelf standing units and Reolink doesn't seem to have anything comparable. Can the Reolink NVR handle a
    | JonOrt_15265696261
    0
    2


  • I'm working with 3 Reolink cameras. (1) 411WS and (2) 410WS. I've successfully logged into the 411 from Google Chrome. It took alot of experimenting, but it's finally working. By the way, for those of you wondering, you need to port forward port 80 and port 1935. Now, while I've gotten that one to w
    | scootr410_14814177755
    0
    3


  • Where is the limitation of 4TB per HDD coming from? If I can install two 4TB drives for a total of 8TB, can I install ONE 8TB drive for a total of 8TB storage. If yes, can I install TWO 8TB drives for a total of 16TB storage?
    | Guest
    0
    4


  • Can you please document the URLs for getting at the different streams? The default RTSP url seems to give the "clear" stream. I also need to access the lower resolution stream for previews. Also, Genius Vision can't seem to recognize the 410 and 411 cameras with the newest firmware as supporting ON
    | JonOrt_15265696261
    0
    5


  • I purchased 3 RLC-422 cameras, and one RLC-423 camera. I'm having them installed this Friday. I set them all up on a RLN8-410 DVR. The three 422 cameras are operating as expected. The 423, not so much. No image, nothing, just "VIDEO LOSS" on that channel. The DVR has the firmware upgraded (Build 1
    | Guest
    0
    2


  • When I view my Reolink cameras with the Camera's built in webserver streaming video, I get nice crystal clear images. When I use the CGI Snapshot, I get images that are darker and slightly grainy. When I use Blue Iris, I get grainy images that become ugly and horrible when the window is made small
    | VirtualPic_11206712601
    0
    4


  • Hi there, Is there any way to change password again on the IP Camera itself? Not the default password, just one that is already set. I can't see any option to change the password on each camera. I have tried on the Windows PC software and iOS app to find the option but can't! Thanks Theo
    | Guest
    0
    2


  • Hi, I initially had my RLC 410 set to email 30s of video footage upon motion detection - the detection worked well, but the video files were heavily distorted when viewed in VLC Player, and unplayable in Quicktime. I just upgraded to the latest firmware, and this appears to have completely fixed th
    | Guest
    0
    6


  • I have 5 410's, 2 411's, and 1 423. They all seem to lose their time settings and often. I have double checked all the settings, all cameras took their respective firmware updates with no issues. All cameras are connected via POE switch, the video stream is great, the interface is good, and no issue
    | Kila_14853865957
    0
    5


  • I'm hoping to confirm how power is supplied to these cameras. They are listed as POE cameras and a POE NVR, but the diagrams of the cameras are showing a separate DC power input. If this camera is plugged into the NVR via CAT5 cable then I shouldn't need anything connected to the DC power input on t
    | tdwyer_14743935443
    0
    3


  • One of my cameras keeps trying to adjust brightness in night mode and keeps triggering the motion detection. It just constantly records. It may be the Gain of the image sensor. it appears to fluctuate in a regular pattern all night long.
    | Guest
    0
    4


  • Has anyone else compared these cameras to other brands? Using the Clear setting (2K resolution) I think the image quality is good (much better than my analog Zmodo system with 480 TV lines), but it doesn't look like 2K to me. In fact, it doesn't even look like 720p. Comparing this camera footage to
    | sjl1986_14062272934
    0
    8


  • I recently bought the 8CH PoE NVR with three RLC-422-P dome cameras, and one Reolink RLC-423. Before installing everything, I felt it best to test each camera, and good thing, too, because nothing works as advertised. The NVR boots up to the Setup Wizard, and allows me to enter a password, but the
    | Guest
    0
    4


  • Hello: I was wondering if it is possible to turn off the LED lights at night. I have my own lighting, and am finding that the LED lights are too strong and tend to wash out the picture at night. I reviewed the user manual, and did not find this questions addressed. Any assistance would be appreci
    | Guest
    0
    5


  • When download the video there no sound, do i need some encoding ? or ... ?
    | eshelon_5747454049
    0
    5


  • Have the NVR set on sensitivity '1", with masking of some bushes that move with the wind, still have recording and email, even with no people or animals present...Any suggestions
    | md.stone_13657603469
    0
    2


  • trying to add an external drive, the NVR see's it but initialization fails, any ideas ?
    | md.stone_13657603469
    0
    4


  • I just recently received an rlk4-210wb4 system. I have only setup two cams so far but everything works pretty well except the time setting. It has been running for just over a day and a half and I have had to reset the time at least 10 times. It always seems to stay on the proper day but times advan
    | Guest
    0
    2


  • I setup my rl410 to my ftp server. I can see the files uploading, but they are writing and overwriting very incorrectly causing large gaps in footage this is what it's doing a. deletes itself after hitting max size and starts the next video b. Starts as a jpeg and turns into an mp4 c starts as a
    | Guest
    0
    4


  • Are there any new PTZ cameras coming out, I have RLC-423, but I wish the Zoom was more then 4X. Any chance this will improve?
    | MykMac_9388206301
    0
    2

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now