FTP Image Transfer - Every 1 Second

[Sean K]

Would it be possible to send FTP images via an NVR every second while motion is in progress. I keep having issues where shadows or car lights will trigger the image transfer. ( Example Below )

I've tried adjusting the sensitivity but it depends on how the trigger happened along with some luck to accurately get the person each time. The reason this is important to me is because i process each image through deepstack. The image below would only indicate only a car is in the picture and actually miss the person that walked by.

[Reolink Fiona]

@seanpkeown_207023540203687
What' 's your camera model? If your camera is with person/vehicle detection, we have released a new firmware for the AI camera last week. We add the 2s/5s/10s on FTP transfer when transferring the images. But now you can use the feature as a standalone camera. Click here to know more, https://community.reolink.com/topic/2841/reolinkers-week-day-4-new-firmware-ai-model-ftp-and-more?page=1.

[Sean K]

@reolink-fiona

Hi Fiona,
I have a mix match list of cameras, none of them with the reolink AI detection. From there i have some of them attached to my RLN8-410.

• RLC-520 x2
• RLC-420 x2
• RLC-422W x1
• C2-Pro x4

I have powershell scripts running that perform various functions when objects are detected outside the house, i don't think i would be able to tie the reolink AI into my environment.

Would the AI cause the NVR to push the images on a higher frequency?

[Reolink Fiona]

@seanpkeown_207023540203687 The AI firmware has been updated recently. In the update, we have added the 2s/5s/10s on FTP transfer when transferring the images. This update just exist in the AI firmware now.

[Sean K]

@reolink-fiona

I just purchased this NVR and a couple of the cameras. Can i submit an enhancement request to lower this time on the NVR products too?

[Reolink Fiona]

@sean-k
I will forward your request to our team for further improvement. Thank you!

[Sean K]

@reolink-fiona

Thank you

[Sean K]

Right after making this post i noticed that the 10, 5, 2 second options became available in the mobile app but the save buttons in the FTP area was grayed.

As of last night 6-11-2022 i was able to change the FTP push time to 2 seconds and everything seems to be functioning as expected.


Thanks ReoLink for making this possible.