wireless looses connection after a second camera install

[user_617650665832448_617650665832448]

Hi I have a Argus Pt solar wireless camera along with a Duo 2 camera. Both are connected by WI-Fi. The problem is that the Argus keeps showing disconnected in the app on the camera screen where both camera views are displayed. I can select connect and it takes me out of the dual screen display to its own screen where it connects and states connected. However, when I switch back to both camera screen display window, it immediately shows the Argus disconnected. Prior to the second camera install, the Argus stayed connected

I had them both connected by a 2.4 connection when I first noticed the issue. I did switch the Duo over to a 5 g connection but didn't help. The only thing I found besides the ip address are of course different, was that the default gateways are different 101.1 for the 2.4 and 102.1 for the 5g. I don't know if this is normal or could be the problem
Any suggestions appreciated
Thanks
Rick

[joseph_1979]

@user_617650665832448_617650665832448 This is normal with battery operated cams to save power. As soon as you move to view another cam the connection with the battery operated cam will be closed. In Windows client version 8.10 which I am running, they removed the option to leave the battery operated camera connected. I saw it in previous versions but never set it.

Prior to adding second camera, you were always connected to the Argus camera.

[Crimp On_62210811129]

My experience is that the Reolink battery powered cameras show "Disconnected" in the app until the user presses on the disconnected message. Then the app connects to the camera.
Fully powered cameras, such as the RLC models and the powered Duo cameras will remain connected all the time.

Cameras receive their network information from the primary router. That includes the IP address of the gateway. Every brand of WiFi router is different. Perhaps your system puts 2.4G and 5G devices into different subnets?

[user_617650665832448_617650665832448]

Thanks for the reply.

If the app shows the battery one is disconnected, will I still receive a notification from it?
Do you think I should place them both on the same 2.4 G . I was trying to limit congestion on the 2.4G is why I went with the 5G on the Duo
Thanks again for your help, much appreciated

[Crimp On_62210811129]

@user_617650665832448_617650665832448 Yes. I believe notifications are separate from "connected".
(Although I must confess that long ago I quit having cameras send notifications. hundreds of messages every day is not something I enjoy.)

[joseph_1979]

@user_617650665832448_617650665832448 If the 5G is reachable at both cameras, then set them to 5G. You have ample bandwidth.

[user_617650665832448_617650665832448]

Thanks for the reply

The wireless don't have the 5g capability option. Would be great if it did. Somehow, I think I got it figured out. On the app, just below the 3 dots there is a little box, If I press that I have the option of a screen with split windows windows and a full screen. I selected the windows screen and now they are both connected. They're little bity screens, but at least both are connected.

Thanks again to all that replied