-
Greetings:
Does anyone have advice or guidance on how to reduce (or eliminate) wind sound as it blows across the mic? I did place a rubber plumber's fitting around the end of the camera, just enough forward so as not to be in the picture...but it doesn't really reduce this noise well.
Thanks in advance for any suggestions.
Ed in TampaReply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@ed_682671253913811 Maybe small bits of self-adhesive "Draught Excluder" around the mic hole.
-
@joseph_1979
Joseph:
Where is the mic hole on the RLC-810A?
Thanks,
Ed
-
The noise filter will be good for you.
Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@user_694562449637625_694562449637625
What is this "noise filter" & where does one get it?
Thanks,
Ed -
@ed_682671253913811 these help quite a lot though not perfectly. And I had to use some better adhesive as they blew-off the first time in high winds...
Go to B and H Photo and search on Bubblebee lav covers. About $16 bucks.
For some reason Reolink won't let me post the link.
Wind noise from mic...how to reduce it?
-
Greetings:
Does anyone have advice or guidance on how to reduce (or eliminate) wind sound as it blows across the mic? I did place a rubber plumber's fitting around the end of the camera, just enough forward so as not to be in the picture...but it doesn't really reduce this noise well.
Thanks in advance for any suggestions.
Ed in Tampa -
The noise filter will be good for you.
All Categories