Flood Light linked to Camera switching on during daylight

[Seb_526812765704330]

Hello. I just installed a Flood Light and linked it to my TrackMix camera.
I could create a rule so that the flood light turns on when the camera detects a person, but apparently that also triggers during daylight.
Isn't there a way to create a rule like "IF a person is detected AND the camera is in night mode THEN switch on flood light" ?

[joseph_1979]

@seb_526812765704330 Would the floodlight switch on when you walk across its PIR during daylight? If yes then email Reolink support to send you a newer firmware of the floodlight and you should be able to adjust the ambient light when the floodlight should switch on.

[Seb_526812765704330]

@joseph-chircop_497308027822318
During daylight, the flood light doesn't come on when not linked to a camera.
It's just when linking it, the only option available is to react to a detection event (person for instance), regardless of ambient light it seems.
Current firmware for light is 3.0.0.1311_22090741

[Seb_526812765704330]

Contacted support, and apparently there's no option to do that

[joseph_1979]

@seb_526812765704330 I have informed them too. If I have the source code ( I program in C++) I will also add the schedule when it is triggered by motion or cameras. few lines of coding..... It doesn't make sense to switch on the floodlight at daylight.