Posts made by Reuven Goldenberg_36887769641

@tussockland_796377221558434

Try 8.17.6
https://reolink.com/software-and-manual/

@joseph_1979 I recovered by reset doorbell to default, now notification is working. Thanks.

@joseph_1979 Ok, turned on but getting zero notifications. I had no problem with notification before this update...

I don't see "push notification" option in App 4.43. How do you get it enabled?

@nomahisssss_477125106348271 You will need to contact Reolink support. I don't understand why they hide the older versions.

@mamymam2013_465350299701478 If you are using UID to connect you must go through Reolink servers which will limit your bandwidth and may force fluent stream. I bypassed Reolink servers by switching off UID and using the DDNS service feature in my router to directly connect to the cameras.

I hope they fixed all the issues with the last 8.14 release. I'm going to wait and see...

Every PC client release is getting worse. Why can't Reolink focus on PC client software stability and functionality? stop adding new features and redesigning the GUI.

The only Windows PC client that will remember the single camera "clear" streaming setting is 8.8.2.

8.8.5 and higher will default to fluent and balanced, depends on the camera model, after going from multi channel to single view.

Is Reolink aware of this problem?

EDIT: UID is disabled, I connect directly via IP:PORT#

@jeanmichel-francois_314337194614920

1. Cancel UID option than set and enable DDNS in your router or on each camera.
2. Create a unique media port number for each camera.
3. To add camera, use the IP/Domain option and the unique port for each camera.

By using DDNS you bypass Reolink servers that cause the freeze. This is how I solved this problem.

My internet speed is 100Mbps upload and 100Mbps download so I would except to have smooth live view.

As I said, iPhone and the Windows machine are using SAME router/network. iPhone client is working well but PC client is always freezes/disconnect.

It's a group of individual Reolink cameras on a different network than the Windows machine.

I have smooth live view and playback on my iPhone however, using Windows 10 with the latest version of Reolink software 8.2.6 I get freezes trying to live view or playback. Why?

New firmware update is available for C1 Hardware version 51316M:

https://support.reolink.com/hc/en-us/articles/360005132794-03-11-2019-Firmware-for-Reolink-C1-Pro-Camera-IPC-51316MPT-

The C1 pro that you have has a different hardware version so you can not use the firmware 1389_18081405.

Thank you. This helped.

In client V7.2.2.18 there is a "beep" when motion is detected. How do I turned it off? it's very annoying.

Thanks.