1. Home
  2. Discussion About Products


  • The birdhouse is always a good option to hide outdoor security cameras. What are your solutions to obscure your Reolink cameras? Reply and show us!
    | Reolink
    0
    13


  • It's 30F outside and very sunny. The solar panels for my Argus PT are not charging the cameras batteries and my batteries are running low. Please advise. I noticed the camera was blinking from orange to green. Doesnt this mean the camera is being charged by the solar panel? But camera battery not ac
    | fluidnyc_222673570898123
    0
    7


  • I recently installed 12 cameras to a job site. I had to give all of them individual static IP addresses as to not cause disruption of service due to a power surge or blackout. All cameras have loaded and can be seen in the Reolink desktop Client app. However, they will not attach to the device ap
    | nfsmarthome_246701965365414
    1
    3


  • Hi, I have an RLK8-520D4-A (hardware: N2MB02; firmware: v3.0.0.123_21031205) and I am using Reolink App v8.2.4. I have 4 active cameras connected to my NVR and I have disabled the entire schedule for camera 4, but the NVR continues to record camera 4 anyway. How can I disable one camera from being r
    | Len
    0
    11


  • Hi, I have a RLN8-410 that came with 4 Reolink Camera. I wanted to add better quakity cameras and I bought one of the best cameras from Anker. The new Anker camera is not plug and play with this nvr I read it has to be connect through and external poe switch. What are the best quality camera from
    | Rafael_401699571097730
    0
    2


  • I discovered a problem with the new firmware v3.0.0.136_20121100 on Reolink RLC-410-5MP. If the file length is set and the long video is divided into several parts, only the first part can be played. Other parts cannot be played by some players or video editors. For example, converting via FFmpeg s
    | milos dh_67999078662396
    0
    4


  • First of all, while I don't like it, I understand the need for no web server in the battery powered models and no direct access to the sdcard data or video stream. What is so disappointing is FORCING the customer to be completely tied to you app and/or cloud service for getting motion recordings an
    | family_392144242835594
    1
    14


  • I have 3 RLC-410-5MP with BlueIris. I am plagued with spiderwebs and flying bugs cris-crossing my IR PoE cameras at night. Just about every evening I walk a round with a cobweb brush, twirling the brush around the front of the camera, and lightly brushing up against it and removing the spider threa
    | Left Coast Geek_399297764155577
    0
    10


  • Why can't I download a 2 minute video from my security camera on Windows 10 client? I go to "playback" drag my camera, click on "timeline" icon and I choose the hour and minutes I want to download but instead it wants to download a whole hour, which is 2.6gb file that I don't need. This was much eas
    | yoco007_164526624891019
    0
    4


  • Hello, I know, and it's witten on the FAQs, that the Realink Lumus not support CGI_RTSP_ONVIF. But, should it be possible with a firmware upgrade to have access to the Reolink Lumus with RTSP or ONVIF ? It's a really missing option. Thanks for answer. Best Regards Lal
    | Lalsacien_365100737700032
    0
    2


  • Hi all, I have two cameras RLC-410-5MP connected to a Surveillance system and Home Assistant through the stream that the camera is providing. Everything was working fine but last week I've updated the camera firmware because the flash support was not working on the web explorer and after the update
    | chuvihi_399908104954080
    0
    2


  • I wish these cameras had a better way of wiring them that was more weatherproof. having the reset button and unused 12V connector just hanging out on exposed pigtails is ugly. the rubber plug for the ethernet 'weatherproof' shell doesn't fit well on any of the outdoor UV grade cables I have, either.
    | Left Coast Geek_399297764155577
    0
    8


  • Hi, first post here! I bought this NVR kit RLK8-410B4-5MP. It worked well out of the box, aside from the HDMi output which was stuffed from the start. No problem, it was replaced and works well. Now I want to output the HDMi signal into an RF digital TV encoder. I have two of these and use one for
    | roy_399288518803605
    0
    2


  • I just added 2 E1's to my system of 4 others. Very surprised to find the new E1's have ethernet ports. The old ones don't! This will be a godsend as the wifi only ones often drop from the network. Is it reliable to assume new E1's (and Pro and Zoom) will have Ethernet? Also, does this mean the new E
    | Brad Schmidt_34102671600
    0
    8


  • Hi there! I wonder how to delete video on the harddisk (NVR: RLK8-410 New Firmware). The only option I encountered, is to format the entire disk. I would like to delete files e.g. older than 4 weeks Am I missing something? K.R. Willart
    | pe1dtq_395554156408997
    0
    4


  • Hello At the moment i own a cheap ONVIV camera which only streams in the RTSP-Format. So its not possible to embed the Stream to my Website because actual Browsers don't support the RTSP-Protocol. I'm thinking about buying an "Reolink RLC-511WS", but i need to know if it's possible to stream that t
    | sf fiechter_376106214240399
    0
    6


  • Is there any instructions that illustrate how to access my IP cams from my own web site? In other words is there any specific HTML code the I can imbed into one of my web pages that will enable viewing of my web cams?
    | Dick_5625631838
    0
    11


  • Just purchased the rlc-822a. Since the time lapse feature does not work while connected to my NVR, do I need to purchase a POE switch?
    | Andre_148322405413012
    0
    2


  • When using the web and mobile UIs for the RCL-423 PTZ, you can manually set the focus. However there appears to be no means to tell the camera to go back to autofocus! (a workaround is changing the zoom level which seems to trigger autofocus again; simply changing the pan/tilt does not work) There
    | Ben L_363180304232580
    0
    2


  • I changed my IP Range on my Eero router setup from 10.0.x.x to 172.16.x.x and the Eero system assigns a new IP address for the Reolink NVR, however, I can't seem to connect to it either via ping, IP address, or any of the Mac client MAC OS or iOS. It's almost like after the power off it doesn't rele
    | Pete_195733172519111
    0
    5

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now