1. Home
  2. Discussion About Products


  • Hello, I have a RLC-510WA mounted on the wall of my garden shed, and the camera looks right into my garden, the terrace and parts of the housewall. There is no sun shine going directly in or on the camera. Nevertheless, the picture is completely overexposed. Please have a look at the attached photo
    | klaus reichenauer_512464448073938
    0
    3


  • I am running this on Catalina and Ventura and when download clips from the cut and download like picking a 5 hour block.. it goes though the whole download and gets to 99.99% and just stalls and then crashes
    | Issom
    0
    3


  • I recently added the E1 Indoor 3MP camera to our Reolink setup as it was fairly cheap on Amazon and adequate for the small area it needs to cover. I'm curious about the Ethernet port on the camera as I can't find any reference to it on Reolink's product pages. The camera itself is very close to th
    | user_727607713124599_727607713124599
    0
    3


  • I have the RLN36 with a RCL823A. Now playing with the alarm outputs to switch on lights thu wireless Thrust switches. That seems to work fine. However I notice I get short alarms, alarm out is activated, light goes on for up to 10-12 seconds, but no video recording. Also LED spot lights on the 823 a
    | user_639868941582417_639868941582417
    0
    2


  • Is there a power supply "cube" style that will support two cameras which would be 4A available with dual cords? Only have a single gang weatherproof box and need to run 2 cameras from that power supply location. Even a 4A supply with single cord and power connector would work if available I could sp
    | boss06518_449790654218427
    0
    4


  • Ill set my system the way I want it, no light at night , patrol and track area, when to alarm and record video and look for people with sensitivity level. The next morning its all changed. I have rest values over and over for days it it does what it wants and my settings always are changed. There
    | chrisferguson01_686561743889029
    0
    2


  • I need a low bit rate stream camera with rather clear image, so I choose reolink product with H.265 feature, I baught RLC-820A. Firmware version: v3.1.0.956_22041501 I use vlc to check rtsp stream H.264 or H.265(rtsp://admin:password@192.168.0.157/h265Preview_01_main), I find only resolution 3840*
    | user_669525845065812_669525845065812
    0
    6


  • Just received my RLC-81PA, really want to try it out, but it won’t connect to my Reolink NVR. It shows up on the list of available cameras, but I always get a can’t connect error message. Doesn’t seem to be a user name or password issue. It’s getting power, the IR lights are on. I’ve done the 10
    | elmiko99_357552804708580
    0
    2


  • My subject PoE NVR has just five ports occupied, one by the original Duo, and four with RLC-810A PoE cams. I've also connected via WiFi an E1 Outdoor cam, thus consuming a total of 7 channels for recording and playback. I assume the RLN8 is limited to 8 eight channels of recording/playback, correct
    | tomsreolink
    0
    3

  • This topic is deleted!

    I do not seem to have the Quick Reply option on my POE door bell, either on the IOS App or Windows desktop. Any ideas please? Thanks
    | reo_366300808405168
    0
    1


  • I am having some issues getting my wired IP camera to connect to my existing house network. I am currently using a Watchguard Firewall Router with LAN set to DHCP then out to an ethernet switch. I plug in the camera's network cable and the Reolink POE injector and the camera powers up ok but will
    | user_725429948465352_725429948465352
    0
    8


  • Having read this topic: https://community.reolink.com/topic/6400/video-doorbell-person-detection-is-busted ... I encountered the same problem with the same firmware and hw versions. I'm using the Wifi version on a 5Ghz network. I bit the bullet and requested support with the help of the online form
    | user_726534656405690_726534656405690
    0
    2


  • Hallo Zusammen, kann der NVR nur mit einem LAN Kabel verbunden werden, oder funktioniert der auch im WLAN? Ich habe den jetzt mit dem Kabel an den Router angeschlossen, möchte den aber lieber ohne Kabel verbinden. Geht das überhaupt? Vielen Dank für Eure Hilfe.
    | user_726171554988257_726171554988257
    0
    3


  • Hi, I wondered if anyone with an NVR could answer the following question? I asked support but I am still unclear what the answer is! I initially asked; If cameras are connected directly to the ports on the NVR and someone unplugs a camera externally and plugs in a laptop, will they have full acces
    | mg_349975036309755
    0
    2


  • More "fun" with RLN8-410: Camera connection failed; Trying reset trick - did not work, plug to different channel - nothing. What the next move? Anybody help me please.
    | Marian Siczek_715086104985814
    0
    11


  • After accidentally downgrading my 410-W I need the newest firmware version please. Can anybody send it to me please? I already submitted a request to customer service.
    | christopher92_487742724366485
    -1
    5


  • I purchased the E1 Pro last week having been satisfied with other Reolink cameras in my home setup. I have been disappointed by now with the E1 Pro microphone, the volume picked up by the camera microphone is very low and tinny compared to other similar cameras I have used. I'd this 'normwl' or is
    | TomCrean
    1
    8


  • hello, I would like to purchase a small system (2 or 3 cameras), for a vacation house. As there is no wifi nor electricity for 2/3 months, I was thinking of a battery camera with integrated sim slot. The question is: can I buy 1 or 2 more wifi cameras, to connect to the same wifi network of the firs
    | antonio089_626720538640449
    0
    6


  • Meine neue E1 Zoom landet jeden morgen in der rechten Ecke und bleibt da hängen. Zum Wachpunkt zurück geht sie auch nicht mehr ?! In der Aufzeichnung sind komische Geräusche zu hören, dann fährt sie nach rechts und bleibt dort stehen
    | McR_723417275101361
    0
    5


  • I got a 10mp system with 4 cameras and they come with a B5K cameras 4 of them. I also added a trackmix poe and the poe doorbell. I was able to update everything but the 4 cameras. I cant find their software anywhere. What is the the firmware currently for the B5K cameras?
    | Issom
    0
    4


  • |

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now