TrackMix PoE/Wifi Pre-Order Available Today!
-
TrackMix is a 4K dual-lens PTZ camera with 6X hybrid zoom and dual tracking.
You can view both full-view and close-up images of the same event synchronously on the same screen(dual-view) with this camera.
Pre-order now: https://bit.ly/3zfMIYe
-
Hi
I received the link to pre-order TrackMix WiFi Camera today, but the link loads a page with general information
Thank you -
The picture is ok. Camera is great.
-
Hi all.
I own a RLN8-410-E NVR with 6 RLC-410 connected ,and I would like to complete the setup with 2 additional TrackMix cameras.
I already know that my NVR can support the video feed from the TrackMix wide-angle lens only, but at the moment is not a big problem for me (maybe in the future I will buy a more recent NVR).
But I have some doubts to be cleared before to procede with the purchase (I still haven't found these informations on the website):
1) Using my current NRV, does the wide-angle camera pan-tilt auto-tracking work? (I'm obviously interested in this feature)
2) Regarding the energy consumption, can my NRV supply enough power (through the PoE) to 6 RLC-410 + 2 TrackMix?
Regards,
Riccardo0View 4 replies-
@rikyunreal_533652699627660
Hi there,
If you connect the camera to the RLN8-410-E
(1) You can only view the wide-angle view and you can view the tracking in the wide-angle. But you can't view the zoom view of the camera. You can know about the tracking in this post, https://community.reolink.com/topic/3797/trackmix-feature-explanation-dual-view-dual-lens-and-dual-tracking.
(2) Yes, TrackMix will only occupy one channel of the NVR. So you can connect 8 cameras to the NVR.
We recommend that you can connect the TrackMix as a standalone camera in the APP if your NVR doesn't support two views. You can enjoy two views on the APP. -
@reolink-fiona Thanks Fiona!
"We recommend that you can connect the TrackMix as a standalone camera in the APP"
No, not in my case, because I want to record the the surveillance video from the TrackMix on the NVR HDD.
Last question.
I would prefer to NOT use the app. Can I fully configure the TracMix through the NVR (like I do now with the RLC-410)? -
@rikyunreal_533652699627660
The setting will not be complete for the TrackMix in the RLN8-5410-E. You may need to connect the TrackMix to the APP/Client to do the setting and then connect it to the NVR.
Another method is to use an addition PoE switch. You can connect the camera under the PoE switch, which is on the same router as the NVR. In this situation, you can connect the camera to the APP/Client and the NVR at the same time. That means you can record and view the video on the HDD on the NVR and can also do setting and view the video in the APP/Client. -
Another method is to use an addition PoE switch. You can connect the camera under the PoE switch, which is on the same router as the NVR. In this situation, you can connect the camera to the APP/Client and the NVR at the same time. That means you can record and view the video on the HDD on the NVR and can also do setting and view the video in the APP/Client.
Sorry Fiona, I didn't understand. I made a diagram:- My current configuration (BLACK)
- you suggested an additional PoE switch for the TrackMix (RED)
In this configuration, how can I record the video feed of the TrackMix on the 7th and 8th channels of the NRV ????
s
-
@rikyunreal_533652699627660 Yes, your diagram is correct! You can find the TrackMix in LAN on the NVR. Then you can add it to the NVR and record it to the HDD.
-
@reolink-fiona Ok, I placed my order! Looking forward to receive the cameras.
Thanks for all informations.
-
-
This camera looks great, very good parameters. I want it as soon as possible)
All the best, Jane, manager, WorkTime
-
Are the two separate views on this camera two separate streams or do both views come across in a single stream?
0View 0 replies-
@dfmets_555861415342419 It is two streams. But you can preview and playback the two streams together at one screen.
-
