-
New Windows Ver 8.12 broke feed for both my RLC-423's (Firmware 309). All other cameras working fine. Went back to Ver 8.11.0 and all camera's fine again.
Reply QuoteShare3- Share this Post
-
copy the link
Copied!
-
New Windows Ver 8.12 broke feed for both my RLC-423's (Firmware 309). All other cameras working fine. Went back to Ver 8.11.0 and all camera's fine again.
Same i have had to revert to 8.11
-
@leeawhite_475558898094213 I am not aware of the v8.12. Has this been provided by support?
-
@joseph_1979 Auto update everytime you open the windows app.
-
@lochiel_470803115704506 Thanks. The main reason not having the upgrade prompt is that they have removed it.
-
@joseph_1979 My app updated itself (using https://home-cdn.reolink.us/files/client/electron-release/reolink_setup_8.12.0.exe)
-
@lochiel_470803115704506 @tomasz-w-szwed_375777793847467 @svearike1_438381197742242 May I know if you guys add your cameras/NVRs to the Client via UIDs or LAN scanning? Thank you.
-
@reolink-lorenz I have added my NVR via UID
-
@joseph_1979 the client pop up the update , now cameras dont work.
-
@tinchotommy_222364008116413 Mine is not upgrading. It could be that the new client has been removed,
-
@lochiel_470803115704506 v8.12.1 I followed the instructions to download Directx, now my older rlc-520 shows only half of the screen. I read you can not uninstall or back out DirectX
-
@rlwheelwright_621864599814302 You may take note of the 520 camera UID and remove it from the device list first. Re-add the camera to the client and see if you can see full screen images. Also, you may try to disable hardware decoding option and process to fix the issue.
If these still won't help, submit a request with the link below and we will get back to you very soon.
https://support.reolink.com/hc/en-us/requests/new/
-
These stop showing up for me.
520, 1220A, E1 Pro, 824A, -
Can't access my NVR RLN8-410 (fw v3.3.0.226_23031644) on 8.12. Reverted back to 8.11 and everything works again.
-
8.12 works fine for me but it seems it is now removed from the site.
-
I downloaded V8.12, hoping it would fix the missing buttons, but instead, my video disappeared. I had to go back to V8.11 and the crop/clip and PTZ Buttons are still missing. Does anyone know of a fix for this in the client?
Reply QuoteShare2- Share this Post
-
copy the link
Copied!
-
@victoria_627138625310723 Hello Victoria, thank you for the feedback. Our team would like to take a further look into the issue. Would you love to do us a favor by allowing a remote access to your PC where the 8.11 version is installed? Feel free to write to me via message or email (lorenz#reolink.com, replace # with @) and I will reply very soon.
-
@victoria_627138625310723 Hi Victoria, you may also try to download this 8.12 beta version and see if this fixes the missing clip and PTZ buttons. Let me know if you have any questions or need any help.
https://home-cdn.reolink.us/files/client/electron-release/reolink_setup_8.12.0-nui.exe
-
The client program was automatically updated today, and I subsequently lost the video feed from all cameras. After reinstalling the V8.11 client app, the video feed functioned well again. I believe Reolink engineers are working on a fix.Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@will2021_597482666070088 I have the same issue with V8.12. Despite raising a ticket there is no solution. Where can I find V8.11 to have a working client again?
-
@mart-tob_723653357826278 Can you describe what is the issue? Maybe you have no video? Today they have released 8.12.1 at their download center. I just did the upgrade and so far it seems fine.
-
i got a pop up update for 8.12 and now my 810 dosnt work.
Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@tinchotommy_222364008116413 Thank you for the update. Our team would like to ask you to help us take a further look into the issue. Please contact me via message and I will reply very soon.
-
This version broke the CLEAR version of the stream. Balanced and Fluent are working.
-
Won't connect to my NVR (RLN8-410 v3.3.0.226_23031644) unless I view playback first.
-
Same issue here. After Windows Ver 8.12.1 installed:
RLC-1220A only live stream after playback.
Two RLC-822A will not livestream nor Playback at all
Reolink Argus 2E will play back and livestream
When I had to write this post, I tried something different and suddenly the live stream worked on all cameras; but after closing and reopening the client same problem as above.
There must be an error in the client. When I installed the update I also had to update my DirectX, which has not been the case beforeReply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@jim_391802144162039 Did you install DirectX package included with the client or the one downloaded from MS?
I suggest you to email support.
v8.12 broke RLC-423
-
New Windows Ver 8.12 broke feed for both my RLC-423's (Firmware 309). All other cameras working fine. Went back to Ver 8.11.0 and all camera's fine again.
-
These stop showing up for me.
520, 1220A, E1 Pro, 824A, -
Can't access my NVR RLN8-410 (fw v3.3.0.226_23031644) on 8.12. Reverted back to 8.11 and everything works again.
-
8.12 works fine for me but it seems it is now removed from the site.
-
I downloaded V8.12, hoping it would fix the missing buttons, but instead, my video disappeared. I had to go back to V8.11 and the crop/clip and PTZ Buttons are still missing. Does anyone know of a fix for this in the client?
-
The client program was automatically updated today, and I subsequently lost the video feed from all cameras. After reinstalling the V8.11 client app, the video feed functioned well again. I believe Reolink engineers are working on a fix. -
i got a pop up update for 8.12 and now my 810 dosnt work.
-
This version broke the CLEAR version of the stream. Balanced and Fluent are working.
-
Won't connect to my NVR (RLN8-410 v3.3.0.226_23031644) unless I view playback first.
-
Same issue here. After Windows Ver 8.12.1 installed:
RLC-1220A only live stream after playback.
Two RLC-822A will not livestream nor Playback at all
Reolink Argus 2E will play back and livestream
When I had to write this post, I tried something different and suddenly the live stream worked on all cameras; but after closing and reopening the client same problem as above.
There must be an error in the client. When I installed the update I also had to update my DirectX, which has not been the case before