Navigation

    Community
     reolink reolink  reolink reolink
    • Search
    • Store
    • Community
    • Support
    • Register
    • Login

    Reolink Firmware 05/23/2020 Firmware for Fixed Lens IP Cameras

    Discussion About Products
    9
    26
    110
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dbchase69_31542880493761
      dbchase69 last edited by

      I "upgraded" the firmware for my 2x RLC-410-5MP and my RLC-420-5MP today and they are completely ruined.

      They were completely fine on the firmware from March. Now I have stuttering video and connecting to FTP is no longer working properly.

      The FTP Test comes back "Failed", but I can see the "test" directory it created on the server. Enabling FTP results in the proper directories being made, however no files get uploaded.

      My RLC-411WS-5MP did not receive an "update" and it continues to work fine. FTP test is "Successful" and files are saved as normal.

      You need to put out a updated firmware ASAP as 3 of my cameras are not able to record to the FTP server now, and the video is all choppy, or send me the March firmware to downgrade.

      1 Reply Last reply Reply Quote 0
      • Cynthia_124785627824270
        Cynthia last edited by

        Hi there, could you please send your request to support@reolink.com they might help you to solve the issue, thank you!

        1 Reply Last reply Reply Quote 0
        • dbchase69_31542880493761
          dbchase69 last edited by

          Cynthia,

          I have sent a detailed email describing how your firmware update is faulty & not recommended to be installed.

          They will not be "helping me to solve" anything. The issue is your firmware, again.

          Cameras are nice, but the software quality over the years often leaves much to be desired.

          1 Reply Last reply Reply Quote 0
          • Crimp On_62210811129
            Crimp On last edited by

            I updated firmware on two RLC-410-5MP and two RLC-420-5MP cameras on 6/3. Process went smoothly and cameras function well. No stuttering video on live play or playback through client app. I also FTP motion recordings to my PC (using Filezilla FTP server) and they continue to show up. Those recordings play well also.

            I keep past versions of camera firmware in order to "go back" if I need to, but so far have never done so.

            dbchase69_31542880493761 2 Replies Last reply Reply Quote 0
            • dbchase69_31542880493761
              dbchase69 @Crimp On last edited by

              I updated firmware on two RLC-410-5MP and two RLC-420-5MP cameras on 6/3. Process went smoothly and cameras function well. No stuttering video on live play or playback through client app. I also FTP motion recordings to my PC (using Filezilla FTP server) and they continue to show up. Those recordings play well also.

              I keep past versions of camera firmware in order to ”go back” if I need to, but so far have never done so.



              Glad to hear yours has gone smoothly. Nothing changed on my end, settings wise. Only the update, and then the cameras no longer record to the FTP, the FTP Test "Fails" on those cameras now, yet the "Test" directory is created on the server, and the daily recording directories are created, but they are empty, no recordings are being created. The choppy video is also only on the updated cameras.

              My RLC-411-5MP that has been on year old firmware due to no updates for it, continues to function and record fine, FTP Test = "PASS" and there are no issues.

              Seemingly the firmware update went smoothly, no errors and cameras rebooted, but then they behave like this.

              I'm stumped.

              1 Reply Last reply Reply Quote 0
              • dbchase69_31542880493761
                dbchase69 @Crimp On last edited by



                I keep past versions of camera firmware in order to ”go back” if I need to, but so far have never done so.



                This I should have done. However, Google has not let me down again and I managed to acquire the March 14th version of the firmware directly from Reolink's servers for 410-5MP & 420-5MP, despite their attempts to hide previous versions.

                Downgraded all cameras affected back to this version and instantly I no longer have stuttering video, and all cameras report "PASSED" on the FTP test and are recording properly.

                My home feels better protected again.

                1 Reply Last reply Reply Quote 0
                • convert65_282528019783816
                  convert65 last edited by

                  Just signed up to confirm that I have similar issues with FTP on all three of my RLC-410-5MP cameras.

                  - FTP test fails, but empty test folder is written to the server.
                  - No jpeg sent to FTP server on motion detection event.
                  - mp4 files are sent and play back ok.

                  I also have emailed support with more specific details

                  1 Reply Last reply Reply Quote 0
                  • Crimp On_62210811129
                    Crimp On last edited by

                    I completely neglected to inquire if FTP was working correctly before the firmware update?
                    My FTP is set up for "clear video and picture", and both show up.
                    I have not tried "fluent" or "balanced" (Bought 5MP cameras, so I want 5MP!)

                    dbchase69_31542880493761 1 Reply Last reply Reply Quote 0
                    • dbchase69_31542880493761
                      dbchase69 @Crimp On last edited by

                      I completely neglected to inquire if FTP was working correctly before the firmware update?
                      My FTP is set up for ”clear video and picture”, and both show up.
                      I have not tried ”fluent” or ”balanced” (Bought 5MP cameras, so I want 5MP!)



                      You said you have your FTP set up to receive "motion recordings", I have mine set up to record 24/7 (blue squares on schedule) and it will not upload anything inside the directories on the FTP using the new firmware.

                      Mine are also set to do clear video & picture.

                      Everything running smooth now after downgrade.

                      1 Reply Last reply Reply Quote 0
                      • Crimp On_62210811129
                        Crimp On last edited by

                        Mine is also set for 24/7. This does not mean that it records (literally) "24/7". It records any "motion" that occurs at any time of the day (24/7), but only "motion events". As far as I am aware, continuous recording is only available when cameras are connected to an NVR.

                        Sorry to be slow to understand. The cameras WERE recording correctly before the firmware upgrade, correct?

                        dbchase69_31542880493761 1 Reply Last reply Reply Quote 0
                        • dbchase69_31542880493761
                          dbchase69 @Crimp On last edited by

                          As far as I am aware, continuous recording is only available when cameras are connected to an NVR.
                          Sorry to be slow to understand. The cameras WERE recording correctly before the firmware upgrade, correct?



                          Negative. I have been continuously recording 24/7 on my cameras since the day I installed them. That's what enabling the blue schedule (NORMAL) does. Green is (MD) motion detection. White is off.

                          Yes, the cameras were working flawlessly before the update. The issues were apparent immediately after the cameras rebooted.
                          Screen-Shot-2020-06-06-at-9.43.49-PM.png

                          1 Reply Last reply Reply Quote 0
                          • Crimp On_62210811129
                            Crimp On last edited by

                            Wow. Thanks for the information. Sorry to be so uninformed. My Windows Client 7.2.2.33 shows only two options, "Motion" (green) or "None" (white). I do not seem to have a choice of BLUE. Aha! The FTP settings have Green, White, and Blue for "normal". I had never wondered what "normal" means. (I guess "normal" means 24.7?) I am not even sure how FTP would handle that. Does it get broken up into "chunks"?

                            Guess I am not much help. Sorry.

                            dbchase69_31542880493761 1 Reply Last reply Reply Quote 0
                            • Kevin C_282608608895182
                              Kevin C last edited by

                              Since the upgrade to this version I am also having issues with FTP recordings and still images on my RLC-420-5MP. The images are distorted and have funny colors all over the place.
                              How do I downgrade to the previous version?

                              Tiago V_278610813595788 1 Reply Last reply Reply Quote 0
                              • convert65_282528019783816
                                convert65 last edited by

                                I emailed support with details of the problem. I got a very quick response, including a copy of the previous firmware as an attachment on their reply email.

                                When you downgrade, be sure to check the ‘update configurations’ box. I forgot to check it on one of my cameras and got locked out. Had to hard reset with the physical reset button.

                                1 Reply Last reply Reply Quote 0
                                • Cynthia_124785627824270
                                  Cynthia last edited by

                                  Hi Friend. Could you please report this issue to the support team: support@reolink.com? Our support Team will help you. Thanks.

                                  1 Reply Last reply Reply Quote 0
                                  • dbchase69_31542880493761
                                    dbchase69 @Crimp On last edited by

                                    Does it get broken up into ”chunks”?

                                    [/quote]

                                    Yes, you can specify chunk size for videos from 10MB-1GB. I currently have a 4TB USB3.0 drive attached to my router (which runs the FTP server) and recording 3 of my 4 cameras 24/7 the drive will last 1.5-2 weeks before it has filled up.

                                    [quote quote=611445]When you downgrade, be sure to check the ‘update configurations' box. I forgot to check it on one of my cameras and got locked out. Had to hard reset with the physical reset button.

                                    [/quote]

                                    I have had firmware issues with these cameras twice now. I did not have to do this with any of my cameras and they are functioning fine. YMMV however.



                                    [quote quote=611251]How do I downgrade to the previous version?



                                    Email support and "demand" the previous version be sent to you. I managed to get mine yesterday through careful Google searches, since it took me 3 days of emailing with support before they relented the last time I had firmware issues.

                                    I do not know why like most companies they do not just leave the links to the previous version active on their downloads page for situations like this. You think by now they would realize that removing them is not helping their customers at all.

                                    1 Reply Last reply Reply Quote 0
                                    • Cynthia_124785627824270
                                      Cynthia last edited by

                                      Hi friend, it is suggested to report your concern or questions to our Support Team by the email support@reolink.com, they will pay attention to it and respond with a knowledgeable reply. Thank you and have nice day!

                                      1 Reply Last reply Reply Quote 0
                                      • Tiago V_278610813595788
                                        Tiago V @Kevin C last edited by

                                        Since the upgrade to this version I am also having issues with FTP recordings and still images on my RLC-420-5MP. The images are distorted and have funny colors all over the place.
                                        How do I downgrade to the previous version?



                                        You can download the previous version of RLC-420-5MP's firmware (v2.0.0.448_19061408) from here

                                        1 Reply Last reply Reply Quote 0
                                        • a_posiadowski_283557804556432
                                          a_posiadowski last edited by

                                          How can I download this new firmware for RLC-410W?

                                          dbchase69_31542880493761 1 Reply Last reply Reply Quote 0
                                          • dbchase69_31542880493761
                                            dbchase69 @a_posiadowski last edited by

                                            How can I download this new firmware for RLC-410W?



                                            You can get it for the RLC-410-5MP here

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 1 / 2
                                            • First post
                                              Last post
                                            Reolink cloud reolink reolink Reolink cloud reolink reolink

                                            Reolink Store|Support|About Us|Privacy Policy|Terms and Conditions

                                            Copyright 2021 © Reolink All Rights Reserved.