Spring Renewal - Share Spring Time-lapse to Win Cameras
360° Fisheye Indoor Camera - Why We Made Fisheye & What We Have Done
Full Introduction and Tips for Shooting Time-lapse Video with Reolink Camera
New Reolink Client v.8.8.5 - Auto Upgrade Client Feature!
I am getting frustrated with every update to Reolink software. It seems that more often than not, you break something that was working fine.For me, I was using app version 188.8.131.52 for Android. It was OK and everything was working fine. Unfortunately, my phone automatically updated the app to version 184.108.40.206and now I have a set of new issues to deal with. I uninstalled the app, then reinstalled and had to add 11 camera's back on. Don't ask me to try changing this setting and that setting, because everything was good the way it waswith the previous version. It's whatever changed in the new version that created these issues.Issue 1: "PIR" button is too small, in my opinion, to see. It's also hard to see if it is set to "on" (Blue) or not because it is so small. The old button was much easier to see. Please revert back to the old way.And do we really need that stupid symbol in the middle of the screen. The words "Not connected" is sufficient enough.Issue 2: When rotating phone horizontally, this is what happens most of the time...Then when I rotate back to vertical, this is what happens most of the time...Please test updates thoroughly before you release them. I would like to also see a way to revert back to the last good working versionbe made available to users if they would like to step back into the last version. Is there a way to install the previous version software?
@starfish21_37513982370005 I agree the PRI button is hard to see with 220.127.116.11 also it disabled the sensor in the camera and the only way to make it work again was to reset the camera.
@starfish21_37513982370005 Hi there, for the PIR sensor change, I will collect your request and forward it to the team for consideration.For the horizontal view and the vertical view problem, could you please reboot your APP and try again?If you want to go back to the previous version, you can download it from our download center. The version is 4.28.08.
@mloving74_484111396954314 For the PIR icon, you can still enable and disable the PIR sensor by clicking the PIR icon. You don't need to reset the camera.
@reolink-fiona It disables the PIR sensor and it wont turn back on even if you try on the pc client the only way to make it work again is to reset the camera (Argus Eco). works like it should with 4.28. I have reported this to support.
@mloving74_484111396954314 Thank you for your work! Our colleague will try to help.
Worse than that for me. Android app no longer connects to ANY of my cameras: Argus (original), RLC-4105MP, RLC-420-5MP, TLC-510WS.NONE of them will even connect.The Windows Client still works, but the Android app is now officially "broken".
I have the absolute same problem. No connection anymore. Windows client is working, but no connection with the android app, not via WiFi and not via LTE.
@crimp-on_62210811129 Do you view via Wifi or cellular? You can try to change the stream mode from high to low. We may need some information to check the issue. I have sent you the message via Chat. You can check.
Similar problem here. After the last app update my cameras are slow to connect and keep zooming in on their own.
@garrett-wolf_360452954181767 You can now try to change the stream mode to high and back to low to figure out the issue. Thank you for reporting the issue to us. We are checking the problem now.
Update: I tried the Android app again this morning, and it now connects to all of my RLC and Argus cameras. Perhaps what I assumed was a problem with the Android app was instead an issue with the Reolink Cloud. The version remains 18.104.22.168 and now it works. Thanks to Fiona for prompting me to take another look.
@crimp-on_62210811129 Thank you for your update! Glad to hear that it solves.
Hi there! Join the Commnunity to get all the latest news, tips and more!