Separate zones and wifi repeater problem.

[email_525317533946102]

It would be helpful for me if the camera had a second zone that could be selected to record only when movement is detected without sending an alert. I would like to record passing trains and a railroad crossing but I don't need an alert for that. I use the current record/alert function for just the parking lot that's close to the railroad crossing.

Also, my RLC-510WA can't connect to a router that's configured as a repeater. I'm guessing that it may have the same problem as some Android phones. They give the message that it couldn't authenticate the connection. The camera doesn't give a message. It just fails to connect to the repeater. It connects fine to the main router or other wifi. I know the repeater/router is configured correctly because Windows computers and iPhones can connect to it without a problem.

[Reolink Fiona]

@email_525317533946102
Thank you for your suggestion on the motion zone. This will be forwarded to our product team for more consideration.

For the connection issue, could you please submit a request here, Submit a request – Reolink Support? Our tech will have a further check for you.

[big_ted]

@email_525317533946102
is your repeater broadcasting a secondary wifi or does your devices only see 1 network in total.
It is common if there is a slight different in password or network name that it is still trying to connect to the main router
instead or the extender.
Depending how it is setup can be worth trying to turn the main router off and see if the camera will then connect to the extender.