1. Home
  2. Discussion About Products


  • I just got yesterday a RLC-423, installed it in a pole using only ethernet cable and a Linksys POE+ switch. Everything was working fine until today, I decided to test lowering the resolution to improve performance in my surveillance station (synology). After I saved the changes the camera restarted
    | pmcnano_14317205943
    0
    2


  • I have a RLC-210W that is only 36 feet away from the NVR yet I can only get the dot at the bottom of the wifi icon to be green. I interpret this as one bar of signal and the video feed is dropped a lot. My second camera is 24 feet from the NVR and it only has 2 bars of signal. Is there any way to en
    | Guest
    0
    23


  • Just installed a new 16 camera system and trying to upgrade the firmware on all of the cameras. Your instructions that come with the zip file do not agree with my Reolink Client software. You say to go to maint and choose "Frimware Upgrade" but my version of Reolink Client does not have this optio
    | Guest
    0
    2


  • If I purchase a 16 channel POE NVR for my home cameras system and also want to attach a number of other POE cameras via a POE switch in my barn, what is the max number of cameras the 16 POE NVR can handle? Is it only 16 (the number of POE ports) or the 16+ some other number of additional IP cameras?
    | Guest
    0
    2


  • I just got my camera, followed all instructions to configure camera, very simple, but login fail in my phone app and doesn't work on my pc either. On my pc got a red question mark on the device. Please help
    | Guest
    0
    2


  • I have the RLC-410 configured behind a DSL modem on IP 10.0.1.131 port 9991. I have the port properly forwarded on the modem. When I browse (Firefox) to the modem's WAN IP 123.456.789.123:9991 I get the normal RLC-410 GUI login screen. I insert the correct username and password then get the followin
    | Guest
    0
    6


  • I'd like to type my ip address in a browser and be able to view the image. Is there a string of commands that will enable me to do this? I had it working for a few hours using a string but now I can't duplicate it. Thank you
    | Guest
    0
    24


  • I put in wireless extenders to help expand my wireless coverage at home. however my wifi camera’s seem to be intermittently losing signal or disconnecting. It reconnects and logs in fine but just constantly disconnecting and then reconnecting. Besides switching to wired, any other suggestions?
    | cleong_13237083500
    0
    4


  • We are in the middle of having a barn rebuild and once it is done we want to install a POE monitoring/security system in it. I have heard great things from this company's quality and support, so any thing people can add that would make this install even better would be welcomed. We plan on on instal
    | Guest
    0
    9


  • is there a way to setup the 410ws to get better pictures on the live video the picture looks much better than the snapshots it saves. i use the 410ws as a weathercam, when its sunny the pictures are really good, and take up about 250 kb but when it gets a little bit cloudy outside the quality goes
    | scr44tch_12405577022
    0
    15


  • With my Reolink RLC-423 connected with Ethernet cable to my Netgear router, my router keeps losing connection to the internet and I have to keep rebooting it. What is it about the camera that could be causing this?
    | phillipsloan_14057487779
    0
    2


  • Does anyone know if I can automaticaly store my recordings etc to my memory card in my phone rather than the default phone?
    | Guest
    0
    2


  • I have purchased a RLC-420 and am wondering the best way to mount it. I would like to use a standard electrical box for ease of wire routing and an over all better finished look to the installation. But I am not sure what size (or shape) of box is best. Any suggestions? What is the consensus as to
    | Guest
    0
    2


  • New RLN8-410 NVR, installed the latest firmware from the website, the "FW" field is blank, however the "Build No" field states build 1607050, is this the latest FW ?
    | md.stone_13657603469
    0
    2


  • Could we add a feature to set the focus and zoom by a number rather than -/+. On low bandwidth connections it is very hard to adjust the focus, it is a trial and error approach that is very time consuming. The autofocus doesn't work well outdoor with foliage and branches. Could such value be saved
    | cedric.cochin_13324515700
    0
    3


  • Hi, I'm currently in the process of evaluating which ip cams to buy. I checked your manuals and faqs but i'm not clear about the following point. the cams should do the following: --> if and during there is motion detected * upload (min 2 to x) pictures per second to an ftp server (secured via ft
    | Jon_10572967178
    0
    4


  • My RLN8-410 shows the following System Information: Build 1601260 Hw No. H3MB02 Cfg version 2.0.0.0 Fw version details NVR63088104000000200000 I just downloaded the firmware on your website. In the release notes it says Firmware Version: HI3535_NVR_8IP_REOLINK_L300_0705_4023_1322.pak I am unable t
    | rhvh2000_7927827623
    0
    4


  • [Disclaimer: I have just enough IT knowledge to be dangerous, so I apologize if the following seems crazy.] I'm interested in purchasing a Reolink 4-channel system. To simplify my wiring configuration, I'm thinking about running it through my structured media center. My idea is to connect 4 cameras
    | brock_12547322178
    0
    2


  • Hello, I just installed Reolink 8 ch. NVR with four 5 Reolink cameras. However the NVR is making a beeping noise and the HDD light is flashing red. Please advise how to stop / resolve the loud NVR beeping and also advise as to what a red flashing lights on the NVR indicate. Thank you, Kushal Pate
    | Guest
    0
    3


  • How to activate the mic from the camera for to get sound on the record or live view? Anyone can help me? I just bought NVR pack 4 camera 4mp RLK8-410b4 pack. Camera is RLC 410. Thanks
    | Guest
    0
    3

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now