Reolink Poe Switch RLA-PS1 Is Available in the US & EU!

[Reolink Fiona]

Hi all,

Reolink PoE switch is ready, and best fits your Reolink ecosystem.

Links to the Reolink PoE Switch :
AMZ US: https://amzn.to/3HJQZqD
Official website US: https://bit.ly/41fc9Ut

What is good:

• 8 PoE+ Ports: 8 PoE+ ports (10/100Mbps)

• 2 Gigabit Ethernet Uplink Ports (10/100/1000Mbps)

• 30W Per PoE Port: Compliant with IEEE802.3af/at standard and has a total power budget of 120W for at most 8 PoE devices.

• Power Management： when the total allocated power exceeds the power budget (120W), the PoE ports will be powered off one by one starting from Port 8 until the total power is below the threshold that the PoE switch is capable of supplying.

• Auto Detection of Adaptive Devices： automatically detect whether the device connected to its ports is a PoE device and whether it needs to be powered.

[Christian]

@reolink-fiona
120W provided power is impressive.
In the wild you will find only 60W for small switches.

But why you provide only 100Mbit on this ports?
1GB/s ist state of the art.
I know that is sufficent for the cams but so you are a little bit restricted.

Regards Chris

[joseph_1979]

@christian 100Mbps per cam is way too much. For instance a 12Mp camera utilising H.265 (high definition) needs a bandwidth of around 24Mbps.

[Edwin_514841036439802]

@christian 100Mbps per cam is way too much. For instance a 12Mp camera utilising H.265 (high definition) needs a bandwidth of around 24Mbps.

What planet are you living on ? It's 10/100/1000/10000 , so if they would have fitted it with a 10mbp port from the stone ages, you would have said "10 mbps is way to slow , now it's only going to let trough half the speed of my 12mp H265 camera" ? Seriously ...

And in reply of the switch, well it's lacking VLAN, for example I use Netgear GS305EPP 120W Plus. works like a charm.

Regards

[burkm_172321696190677]

@joseph_1979
You are missing the situation, where other clients have to be connected to the same switch too (constraints), which might have a higher transfer rate...

[joseph_1979]

@burkm_172321696190677 Missing what? For the pupose of cameras it is more than adequate to have 100M for each poe port and 2G as Uplinks.