NVR RLN8-410-E Firmware

Adelphia UK

I have an NVR RLN8-410-E (H3MB16) and I was wondering when (or even if) the version 3 of the firmware will be available?

I have just upgraded my cameras (RLC-4105MP) to version 3 (3.0.0.136.20121100) and I would like to keep the versioning the same across devices.

Is version 3 of the firmware for H3MB16 NVRs' going to be released anytime soon, just so I know whether to hold my breath or not?

Thanks.

Reolink Fiona

@adelphia-uk_235204602142944
Now the latest firmware of the RLC8-410-E (H3MB16) is v2.0.0.274. You can download it at the following link.

https://home-cdn.reolink.us/wp-content%2Fuploads%2F2020%2F12%2F110806061607673966.7966.zip?download_name=firmware_RLN8_410_E_274_20120701.zip

ramondp27

Perhaps about time to release a new firmware.

This NVR is full of issues:

Does not connect on iMac application (connection failed) but does connect on iphone application. Both iMac, iphone, and NVR are on the same LAN. Who knows why
Once connected on the iphone application, it does not detect / present any of the IP camera feeds. Cameras and NVR are connected to the same LAN. Cameras can connect to the iphone application directly without problems

I mean reolink... this is a *bare* minimum on basic functionality, sirs...

Lorenz

Hello @ramondp27_445871839580353, thank you for the feedback. May we know if you have upgraded your NVR with the latest firmware v2.0.0.274? If not, please check out the previous post by @Reolink-Fiona and upgrade your NVR.

Also, you may upgrade your mobile app and desktop software to the latest version and see if the issues remain. Download Reolink app & Reolink Client here, https://reolink.com/software-and-manual/

Feel free to contact us if you have any additional questions.

ramondp27

@reolink-lorenz these problems are with the very latest firmware and app available by reolink. So yes, I´m used the latest releases...

Reolink Fiona

@ramondp27_445871839580353
You can try to check if the cameras work fine on the NVR monitor first.

Here are some troubleshooting steps for your reference, https://support.reolink.com/hc/en-us/articles/360013797414-Login-Failed-When-Accessing-Reolink-IP-Cameras-via-Reolink-Client-in-LAN. Please check to find the issue.

Aaron

Is the RLN8-410-e no longer a supported device (since it is no longer listed on the site and the latest firmware update is a couple years old)?

Reolink Fiona

@aaron_409453494317228
The RLN8-410-E can still be compatible with our cameras. You can know more about different models NVR supported information here, https://support.reolink.com/hc/en-us/articles/900000602543-Hardware-Version-of-Reolink-NVRs.

Now the latest firmware of the RLC8-410-E (H3MB16) is v2.0.0.274. You can download it at the following link.
https://home-cdn.reolink.us/wp-content%2Fuploads%2F2020%2F12%2F110806061607673966.7966.zip?download_name=firmware_RLN8_410_E_274_20120701.zip

jehandley

@reolink-fiona

we've downloaded this and extracted the PAK file but when trying to update we get the update failed message? can anyone help with a solution.

Reolink Fiona

@jehandley_272473547161739 Do you upgrade your NVR via the PC Client or monitor? If you use the PC Client, you can try to check if you have the latest version Client. Please download the Client here, App & Client - Reolink. If it still can't work, please use the monitor to update.

If you use the NVR monitor, you can restart the NVR and try to update it again.

Here is the guide for the upgrade, https://support.reolink.com/hc/en-us/articles/360005131094-How-to-Upgrade-Firmware-via-PoE-NVRs.