CX410: Reolink First True Color Night Vision Camera with F/1.0 Aperture & 1/1.8’’ Sensor
Talk About the Local Storage: Pros/Cons and Local Storage Options
Bringing Up New Products Check Out What's Coming Next
Where to install the 360° Reolink Fisheye? Here are recommended Positions
Hi all,In the new launch of Client v8.10.3, we have adopted a new framework, which has improved the Client live view fluency according to the user feedback. So thanks for the help you provided during the Client v8.10.2 Beta test. You have offered us great suggestions for future improvement.We also received some feedback about some issues that happened after the Client update. We care about them and are trying our best to find the issues. If you find some abnormal issues in the Client, you could submit a request with some screenshots and your PC system info, Submit a request – Reolink Support. We will look into them and try to help.Thanks! Fiona
HiGood news about the the new Windows client, thank you.However when I try to install it, I get "64-Bit windows is required", as I'm using 32-bit windows 10 and previous versions worked fine, has 32-bit support been dropped?Thanks
@gary-d_344027431432324 Previous clients were 32bit and the 8.10.x clients are 64bit. Therefore to run them you need a 64bit Win OS.
FYINo problem(s) with the new window client with noticeable speed improvements using my RLC-511w, RLC-810a, RLC-820a, RLC-823a, RLC-823a 16X, Argus PT 2k and Argus 2 (4 cameras) cameras.
After installing this new version my screen constantly flickers when using the clear view for all 4 cameras in live view and playback. Can you help troubleshoot this issue.Thanks,Doug
@user_694003558920413_694003558920413 There is a newer version 8.10.4 just in case you are on 8.10.3.
@joseph_1979 I am on 10.4. But had the same issue when I went to 10.3.
App crashes constantly with 8.10.3 and the new 8.10.4. The app suddenly closes (crashes) without warning. No errors produced. Compatibility modes change nothing. It can happen within seconds of launching or up to 10 minutes of running. Win11 64bit
@michael_167505559982311 Me too. I'm on Win10 x64. Reverted to 8.8.5 has cured my issues.
@michael_167505559982311 I have the same problem since 2 updates ago. The program just closes without any errors.
Been down for 48 hours trying to get 8.10.3 working on my system(s). Enough is enough, finally uninstalled and found the previous 8.5.5 version and everything works great again. Next time do a Beta release to the community before releasing any major upgrades, they will flush out any system issues. My frustration resolved, but the problem is not fixed!
@dman_694072276783304 where did you find the old v 5.5.5 software?
8.10.3 and 8.10.4 gives me lots of flickering and corrupted/distorted imagery intermittently. No issues viewing through the web viewer. Can you guys please fix the Windows app you just broke!
With the new reolink client v8.10.4 I have lost the Talk, Time Lapse, Audio Alarm, Clip, PTZ, Record, Snapshot function icons on my PC (HP Pavilion 23, Windows 10, 64-bit OS, 16GB RAM). I have to scroll across the screen bottom, find the location where the icon is normally, and then a small text box appears with the function. I’m guessing this is a graphics issue (?) but did not exist before the recent upgrade(s). Any help from anyone on this?
@davedestin_604541370818687 You are not alone. I also have the same problem.
@davedestin_604541370818687 +1. v8.10.3 and v8.10.4 broke in this manner for me as well. Need Reolink to elevate this and push out a patch ASAP!
I had also very bad experience with 8.10.4, It is flickering in clear mode and in fluent/balance mode I can see only lot of pixels, older version was very good.
Installed update v8.10.4 now i can not playback from a past date can you help.Thanks for the help reverted to 8.8.5 all okay.
I tried version 8.10.4, and while it does seem use system resources better, there is STILL an issue when using the multiple view screen and multiple NVRs. Consistently, when restarting the app,there are several cameras from one of the NVRs that are dropped and you must bring each of them back to the multi-view screen at every restart of the app.THIS HAS BEEN BROKEN SINCE version 8.8.5. Reverting to version 8.8.5 solves the issue. Has anyone else experienced dropping cameras from the multi-screen view when restarting the app? Does anybody at Reolink test these software releases before pushing them out?
I have found 8.10.14 and 15 to be totally buggy, confusing camera names, creating ghost versions of same camera, overlaying good cameras with redundantcopies of other cams. In other words useless. Have reverted to 8.8.5
The new version crashes to the desktop all the time it is a worthless piece of garbage. an AI could have put a better poiece of software together!!!
this client v8.10.4 work very well o windows 11 pc. very good work
@ramms_119 Good to hear that. I have it running on Win 10 and 11 respectively.
running latest version v.8.10.4:I can't download the "clear" (highest quality) recordings anymore.Normally you select on the playback screen with right click mouse in the popup the stream quality.When you switched over in the past to the "recording" tab the video playback (and download option) was then in the same stream quality.If I select "clear" on playback, the streams on "recording" are still "fluent", If you switch back from "recordings" to "live playback" all is again on "fluent" instead of the selected "clear".
Hi there! Join the Commnunity to get all the latest news, tips and more!