@reolink-lorenz I wonder if auto-zoom can also be added. Its nice tracking can detect a person but zooming would might make it possible to see their face.

@john_350143387672724

I third this request, it would be nice to have the guard point on the building at night and on the parking lot while we're open.

@big_ted It just means the change in quality isn't detectable to the human eye. The same thing happens with audio, after while the change in quality isn't undetectable to our ears. In this case I would keep the bitrate up since it might make a difference when you zoom in on something you want to see like a face or a license plate etc...

Just thought I'd throw this out there, the new firmware seems to be working as advertised.

I would still like to have auto tracking while patrolling.

I would like to have 4 preset patrol points but have it auto track and stay with any moving targets (person or car) in those zones.

@robert-leyzerovich_519547077562499 Thanks but that would leave the camera in position for 5 minutes even when a car speeds through the zone.

Here's what I'm looking for, lets say a person walking their dog comes across our grass. The camera will track them up to the guard point setting them return to the set point. I would like it to keep tracking them as long as it can so we can see whose dogs are taking dumps on our grass. That way we can get the owners to pick it up.

Suppose a robber walks through the guard point on their way to a window. The camera will track them up to the guard point setting them return to the set point. I would like it to stay on the person and film them intruding our premise so we have evidence to give police.

Otherwise it's working just fine returning to the set point for things that move quickly through the zone.

I had logged into our RLN8-410 (N3MB01) via a web browser and was trying to see if I can get one of the camera's to stream outside of the NVR.

I went to turn off the RTMP switch that I had enabled to test and accidentally turned off the HTTP switch at the same time (I don't see either of those switches in the client or directly on the NVR). Now I can't find the switch to turn it back on? Anyway to re-enable web access without resetting the NVR to default?

Hello,

Has anyone tried a wireless mouse with the RLN8-410 (N3MB01)? Is there one that works extremely well and has a long range?

We have the NVR downstairs in the boiler room since that's where the wires left the building. But the monitor is up one floor in the office. I'm trying to figure out a way to control the NVR from the office without the expense of moving it upstairs.

Also, there's only one USB port? How do you upgrade the firmware when the mouse is in that port?

@chuck_529633235447953

This is the switch I accidentally turned off, what it doesn't say is how to turn it back on once it's been turned off and the switch no longer appears in that screen. Any help please?

https://support.reolink.com/hc/en-us/articles/900004435763-How-to-Set-up-Reolink-Ports-Settings-via-Reolink-Client-New-Client-?source=search

@bearhug To answer your question about how the light will impact it, the light will make the picture change to color at night if it's bright enough which I believe it is. Not really a worry, it's actually a better view at night.

I found turning on the IR at night causes a messy and distorted picture. You may find the picture looks a lot better with the IR off.

Anyone have ideas how to zoom in on an image? For instance, how to zoom in and read the license plate? Or how to zoom in to see a persons face?

We have 4 RLC-823A which do good capturing the image but we can't make nothing out.

Anyone know if a Uniview, Model NVR301-08X-P8 NVR can be added to the ReoLink Client? We had one added to our church and it would be nice if I could see all the camera's in the same client.

@joseph-chircop_497308027822318 I've reset it multiple times and the setting no longer appears, even when logging in from the NVR. It just disappeared.

@ginny No go, I hate to have to reset it to default and start over but I don't see any other way to get web access back.

@ginny Thanks, I'll give that a try when I get to the church today.

@chuck_529633235447953

This is the switch I accidentally turned off, what it doesn't say is how to turn it back on once it's been turned off and the switch no longer appears in that screen. Any help please?

https://support.reolink.com/hc/en-us/articles/900004435763-How-to-Set-up-Reolink-Ports-Settings-via-Reolink-Client-New-Client-?source=search

@user_650388602073200_650388602073200 The last setting in the picture they linked says export/import settings. That is how you'll save then restore your configuration.

I had logged into our RLN8-410 (N3MB01) via a web browser and was trying to see if I can get one of the camera's to stream outside of the NVR.

I went to turn off the RTMP switch that I had enabled to test and accidentally turned off the HTTP switch at the same time (I don't see either of those switches in the client or directly on the NVR). Now I can't find the switch to turn it back on? Anyway to re-enable web access without resetting the NVR to default?

@vigy_591093180735512

Not sure about the others but I have motion turned off and just use people and cars for alarms. I don't have your problem.

@joseph-chircop_497308027822318 This is the setting I was referring to under alarms. For some reason it is always active when I log back in and I'd like it to stay off. I checked and I don't have pet detection active anywhere to include push, record etc... This seems to be more of a bud than a feature?