1. Home
  2. Reolink Client & APP


  • I have some comments regarding the Client and App for the RLC-823A Camera: Windows Client: PTZ pushing plus / minus doesn't work. Same applies for manual focus, plus/minus buttons doesn't work. It is close to impossible to use the slider and obtain a good manual focus. Suggestion: Add selection of
    | fredrik_443121366618298
    1
    6


  • So, until now, I have not really needed push notifications.... but things have changed. I have it all set up, and it all works! The only problem is...the most annoying sound going.... and I can't change it. I am running an iPhone 12 on 15.3.1, using Reolink app 4.29.2.1 I have googled a million
    | Tazzy_423116622815407
    0
    8


  • I have E1 pro and E1 outdoor and Argus 2 and Argus 3 connected to Google Home, but my 3 Lumuses fail every time when I try to enable. They are not on the list of excluded cameras for this purpose. Is that an oversight in the documentation?
    | inge_241341868548265
    0
    8


  • NVR RLN8-410 Getting a connection failure in both the app and the desktop client. Both recognize the NVR after taking some time to do that, but the app is getting "Connection failed." on my cameras now, continually refreshing with no channel image showing up. I have an airport extreme 802.11n 5t
    | Nathan_480716551917715
    0
    2


  • I am going to buy an E1 camera. What is the behavior of the app when motion is detected? - the app immediately downloads the video to the phone. - the application sends only a notification, the video is downloaded from the SD card only when the user starts playback. I ask because I'm wondering how
    | elger lavar_545071850492126
    0
    2


  • Hello everyone, I would like to implement a perimeter protection (along a line) in addition to a 24-hour continuous recording in two areas. But since there are irregular times when the perimeter may also be legitimately crossed I am wondering if I can simply activate / deactivate the alarm in the
    | s brueck_544642535780537
    0
    2


  • Please excuse the novice here. Is there a way to setup an app that views individual cameras from multiple locations? Currently we have an NVR in each location and I have been successful at adding each NVR to the app, but not individual cameras. Ultimately, I would like one app to show the front d
    | office_542567929233639
    0
    2


  • We really need an Android TV app for the NVRs... I have installed hundreds and hate having to side load apps and scalers to get an Android TV to be used as a monitor. Even tried a few firesticks and it's just cumbersome for my customers. REALLY REALLY REALLY NEED A NATIVE TV APP. The product roadmap
    | wireguysny_347834925220068
    0
    2

  • This topic is deleted!

    As of this morning my 3 cameras are not recording. 2Argus PT and 1 Argus 2. All are fully functioning with 100% charged batteries and strong Wi-Fi. I can record manually but automatically it’s not recording. PIR is enabled. Have app on iPad and also android. I’m guessing app doesn’t like date
    | NYC Pilot_226659222425764
    0
    1


  • I am having no luck at all with getting "Client" to work with my NVR. 1 year old system. POE, Ethernet cable from NVR to my router. If I disconnect the ethernet cable I get a warning on screen that there is no connection - so I assume the NVR is actually connected. I install Client on my PC and it n
    | zalmaflash_316143213592812
    0
    16


  • When I use the Snapshot button on videos from a few days ago, the JPG file name is current date and time. The JPG file name should be the date/time of the video you taken the snapshot from. Windows Client: v8.7.3
    | Tony2.0
    0
    2


  • Can you let us know when we shall have a stable Android application since the failed updates 4.49.0.X? Hope that this time you have learnt a lesson that before launching a product you need to have adequate testing and passed the necessary quality? Your rating has been fallen on the day with increasi
    | joseph_1979
    0
    14

  • This topic is deleted!

    I am using the app for Android. When i want to upgrade the firmware i have to log on by web browser in the Cliënt. My tablet says it is not safe to do that. In the app you also don't see any numbers to install the Spotlight. In the Cliënt you see numbers, so it is easier to install the Spotlight
    | faasio82_480971996033257
    0
    1


  • Hello! I see the latest version for macOS is 8.7.3, but the App Store still has the 3.5.6! (more than three years ago) It would be desirable that the App Store should have the latest version: I don't think it makes sense to download such an old version. Also, the macOS app is not yet optimized for
    | gmac71624_538988406644942
    1
    3


  • I'm thinking of sharing my Argus PT w/solar with my eager supportive friendly next-door neighbor. Then maybe also with my other friend/neighbor down the street. Questions: 1. What settings can they modify through their app? (I'm assuming they would use the same Reolink mobile app) 2. What happens
    | Ken
    0
    3


  • I have changed my wifi password. Now both of my camera's doesnt connect anymore. 523wa & 511wa I have reset the camera with the power off and pushing the reset button. Didnt't work. Please help!
    | faasio82_480971996033257
    0
    3


  • I recently posted this topic in the other forum. Now clearly it's a software problem. The camera itself proves to be able to pan/tilt to any angle, but only by luck. The mobile app pan/tilt software control is indeed the problem. It has very poor control of especially the tilt. It keeps "overshooti
    | Ken
    0
    2

  • This topic is deleted!

    Hi all, I have a number of RLC-822A and RLC-842A cameras and they are all connected and managed by a NVR. I have recently purchased and plugged in some 256GB SD Cards for all of my cameras, but unfortunately, I am not able to find a way to check whether videos are being recorded on those SD Cards.
    | edmund c chow_533560189997241
    0
    1


  • My system no longer marks clips of motion detection for playback even though I get the push notification when motion is detected. This worked flawlessly up until I downloaded the Windows Client and added my NVR. It also required me to format my HDD when I went to the playback screen on the Windows C
    | skylergibson3_537253607686392
    0
    2


  • I have 22 Reo cameras of which 8 are 510A's. My existing 22 Reo's all show on my Windows 10 Reo desktop app. I purchased 2 new 510A through Amazon and neither are found by the desktop app. I have reset to factory both cameras. I was able to find one of the cameras using the Android app. Using t
    | clif99_536560945828046
    0
    5


  • |

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now