New NVR Firmware is on Download Center Now!

[Reolink Fiona]

Hi guys,

The new firmware for the below NVR is ready.
RLN8-410 (NVR): N3MB01 N2MB02 or H3MB18
RLN16-410 (NVR): H3MB18
Download via http://bit.ly/3iEClr4


What's New:
1. Optimized experience for preview and playback.

2.Adapted to Reolink Video Doorbell.

3. Adapted to Reolink Floodlight Duo series cameras.

4. Optimized adaption TrackMix series and Duo2 series cameras
For viewing dual-lens of the camera, now it still needs software compatibility. You can view the dual-lens of TrackMix in IOS v4.34. It will be available in Android v4.35, which will be released next week. PC v8.84 is under testing and it will be public soon.

5. Fixed that some users failed to enable push.

6. Fixed that Doorbell cameras failed to load the audio interface on iOS App when connected to NVR.

7. Fixed that the FTP function of the NVR can not be saved when setting it via iOS App.

8. Fixed that the video can not be searched across days.

9. Optimize network-related settings.

10. Update Web client.

11. Fixed other known bugs.

[user_637250904707098_637250904707098]

Thanks for the update and quick reply. I'll be sure to keep an eye on this thread.

[user_649648726790158_649648726790158]

@user_637250904707098_637250904707098
That's a step-by-step guide! Thank you!

[Curls]

After updating the NVR's Firmware I'm having problems viewing the cameras away from the home network. I also can't view the clear stream on home network but can view fluent and balanced fine on the latest Android app. But on the windows client I can view the clear stream just fine.

[Reolink Fiona]

@curls You can disable the hardware decoding on your APP first.
Refer to this article to disable it: https://support.reolink.com/hc/en-us/articles/900000587506-How-to-Enable-Disable-Hardware-Decoding-on-Reolink-Android-App

[swrobel]

When downloading this, it says it's recommended to Reset Configuration, which seems pretty annoying for a minor firmware upgrade (3.1 to 3.2). Is this really necessary. I imagine I will have to reconfigure everything on my NVR if I do this...

[Reolink Fiona]

@swrobel It is not necessary to reset configuration. But it would be better to check whether the configuration is still normal and effective after the upgrade.

[Matthew_635366143033465]

@reolink-fiona It would be really nice if the firmware itself could validate settings, and highlight things that might need attention after an update.

[user_599858181599299_599858181599299]

Thank you for this! My RLN8-410 wouldn't let me configure either of my Duo 2 PoE cameras until I applied this firmware update.

[user_599858181599299_599858181599299]

While this firmware did resolve some of my problems, unfortunately now I haven't been able to get push notifications working again at all. Nor does FTP upload appear to do anything aside from create a text file when I click the "test" button. Also, one of my cameras says it is constantly detecting motion even when I have the sensitivity set very low. Rebooting my NVR doesn't resolve any of these issues.

[Reolink Fiona]

@user_599858181599299_599858181599299 Sorry for the problem. May l know what's your NVR's hardware version?

[user_638690567065637_638690567065637]

me too facing the similar issues.

[rowewgleichner_612301155877621]

you are not alone here, I wonder when it would be fixed

[user_637618372325376_637618372325376]

Use the same computer where you saved the firmware file to access the NVR. Using any web browser, type the IP address of the NVR into the web browser address bar. Log in to the NVR with your user credentials. Navigate to Setup > Maintenance > Maintenance > Local Upgrade > Select NVR.

[user_638337673601072_638337673601072]

Step 1: Download the latest firmware to your PC. Step 2: Extract the digicap. dav file (which is the actual firmware file) from the zipped file you downloaded. Step 6: Scroll to the bottom of the screen you'll see Upgrade Firmware.

[user_643648472444965_643648472444965]

Hi, I'm struggling to get push notifications to work after updating,
(N3MB01) after I updated yesterday I tried to reset the NVR and it worked yesterday, but today it no longer works.

[joseph_1979]

@user_643648472444965_643648472444965 Can you reset one of the cameras and check if you will continue to have push notifications from this cam?

[user_643648472444965_643648472444965]

@joseph-chircop_497308027822318 I just updated the cameras (RLC-810A) to the latest FW (v3.1.0.956_22041503) will try to reset one and try

[alezilux_393233359892645]

This new firmware works properly on my NVR RLN8-410-E H3MB16 (i haven’t H3MB18) ?
thank you in advance

[Carp Diem]

@alezilux_393233359892645 It has been pointed out above that this firmware only works on H3MB18.