1. Home
  2. Discussion About Products


  • I have seen a few people that use the Reolink cameras to upload an image to Weather Underground, however looking on these forums it appears that the cameras themselves do not support this; without sending video also. How are others doing it today until Reolink is able to address it in their firmware
    | Guest
    0
    2


  • I have an RLN8-410 that was working fine for the past week. I turned it on today and the screen is not centered. Please see the attached images. The top half of the screens wraps onto the bottom. I've shutdown and power-cycled the device several times. It only has 2 cameras connected at the mome
    | veccster_19595655086
    0
    1


  • Before I buy a NVR, I would like to know how the internal switch works. Is the NVR running it's own internal DHCP server to assign IP addresses to connected cameras? Is this a different IP segement, not the same as the connected router? For security reasons, you don't want if someone pulls a came
    | Guest
    0
    5


  • I'm using a RLC-410 with the latest firmware. I selected PAL 1080p and 25fps. Why is the recorded file from the camera only 8fps? Properties.png
    | Guest
    0
    3


  • I recently purchased the RLN8-410 NVR and installed 3 422 cameras, and one 423 camera. The 422 cameras all require 6.5 Watts of power to function, the 423, which has PTZ, requires 22 Watts. I needed an injector for the 423. So my question is this: What's the maximum Wattage output of the RLN8-410? H
    | Guest
    0
    3


  • Hi i have the RLC-410WS firmware v2.0.0.1215_16091802, connected via wifi when i try to access the webinterface i dont get the login information just a "cant reach url" error when i try to acces the stream via vlc and rtsp://xxxxxx:xxxxxxxx@ipaddress//h264Preview_01_main i dont get a connecti
    | scr44tch_12405577022
    0
    4


  • I have a RLK4-210WB4 installed and was working fine. All of a sudden when the laptop computer (separate computer)that sets about 6 ft from the system is put into sleep mode the cameras do not show on the screen. When you wake up the laptop the cameras come on the screen. Tried to find what was causi
    | Guest
    0
    2


  • Is the power cable (see attachment) available for purchase? Cable.png
    | Dick_5625631838
    0
    2


  • We have 30 camera and wanted to use the PC application to view them in 4x4 video walls on one screen and have them rotate every minute or so .. like many 3rd party applications can do. We have heard the RLC-210W does not play nice with any other applications out there and wanted to know if there was
    | Guest
    0
    2


  • We have purchased the RLK4-210WB4 kit and cannot connect to the ip cameras included in the kit via the IE browser .. is the camera different then the one purchased separately? We have hard factory reset.. the software (app) finds the camera fine.. we have tried even putting the port id after the url
    | Guest
    0
    2


  • Hi Guys, new to the forum. I just purchased a new reolink rlc-410ws. I have it setup and my sons bike was stolen last night. I checked the camera and for some reason I only have recordings for the day of the 4th not the night of the 3rd. In the software it says "search complete" and there is no rec
    | hkyle_19103050624
    0
    2


  • Hi all, I've been setting up and testing some Reolink cams on the Hikvision NVR. Everything actually works quite well with one exception thatI'm stuck on. The 423 ptz model has presets which once loaded onto the camera via the Reolink software can be called by the NVR software. They work fine and
    | Guest
    0
    4


  • I have just purchased a 423 and am having trouble setting up a new password. It is the default blank. I have gone through the manual and all the menu options under 'Device settings' but find no help. Is there a way to reset it without rebooting the devise. I have set up a static IP address and other
    | Voyager3_17386705633
    0
    2


  • I can not connect my RLC-411WS to my RLK4-210WB4. When I go to my device list the camera is in the list with an IP address from the NVR. I assign the camera a channel and click apply and the status shows Connect failed. Help. IMAG16331.jpg
    | Doug_18617390940
    0
    5


  • I recently installed the ReoLink, but my challenge is to be able to turn on the recording mode at will. When I leave the house, I want it to start watching for motion. My thought is to get a Levitron appliance switch that I can control from Wink, then have a "robot" that I can click on to turn on th
    | Guest
    0
    2


  • What is the maximum resolution the camera 410ws can captured to view locally. Can't see the different when switching from 720 and 1080
    | Guest
    0
    3


  • I have the RLK8-410B2D2 POE NVR Kit. I set an admin password today, and now I cannot log back into my NVR. I am sure I'm entering the password that I entered twice when I set it up. I attempted to reset the password using Method 2 described here https://reolink.com/faq/reset-password-of-your-nvr/,
    | mcampbell371_13451407742
    0
    2


  • I have 8 ch annel PoE HD NVR 7ea RLC 410 and 1ea 411 Im trying to get license plates I get the during the day but not at night any help would be appreciate just trying to get the most for my system
    | Guest
    0
    2


  • Hello, I've bought on amazon an RLC-411S, but I notice that at night the recordings have low fps. Is there a way to improve this, since it's really important the recordings at night. PS: I also realized that I can't reproduce the h264 on the windows software. It never plays the recorded files.
    | Guest
    0
    6


  • Why can I not specify the correct DST dates? November 6, 2016 and March 12, 2017.
    | Guest
    0
    2

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now