1. Home
  2. Reolink Client & APP


  • draft 1: When i double click on specific camera resolution is on Standard by default and no Clear. I always have to flip the resolution to clear draft 2: I have 4 camera windows open, and when want one camera to set on Standard, date and camera they have a double text size it doesn't look nice
    | dg
    1
    20


  • Hi. No push, no mail withis release. Testing email I've error 400. I already tried to initialiaze my camera argus 2. Please what can I do ?
    | chrisJ_460120163324062
    0
    2


  • Re: Is anyone else getting a black screen after installing the new 8.03 on Windows? Hi, I Just upgraded to the latest version 8.7.1 , installation goes fine but then i get black screen when running. any Ideas ? how can i go back to last version or get a fix to this one ? Thanks, Roni s.
    | Roni_287387360964801
    0
    2


  • Hi. I have 3 Reolink Go cameras (all firmware version v1.0.213.00) and usually receive at least one email alert a night from each camera. I noticed that I hadn't received an email for a few nights so started investigating. It turns out that the cameras hadn't recorded anything since 7 March. On che
    | chris_490556869865720
    0
    8


  • The 8.7.1 client is much tidier than the Windows client v7.2.2.33 which I used until recently. Unfortunately, the picture quality appears to be a lot worse due to the forced stream downgrade. But maybe you can manage the balancing act between the GPU and CPU capacity in the next version. That would
    | GimmeShelter
    0
    2


  • I can confirm that the version .06 "fix" does not fix the issues created from .05. 1. Still do not receive any push notifications, 2. Still experience a clipped view when rotating phone from vertical to horizontal (most times, not all) 3. PIR button is still too small to see Also noticed that when t
    | starfish21_37513982370005
    0
    12


  • Greetings, I set up local record, and each video was five minutes, which is correct. Unfortunately, I found out that local record only works when the desktop client was running, which meant that it wasn't possible to have it recording all the time, so I need another option. I set up FTP. The files
    | Shane
    0
    3

  • This topic is deleted!

    Finding the right software developer for your company can be difficult. You need someone who is knowledgeable in their field, and can hit the ground running. But how do you find the right developer, and how do you know that they are the right fit for your company? Here are a few tips to help you get
    | mobilunity ukr_508403720175812
    0
    1


  • I checked the reolink app and it doesnt show any option for reolink cloud. After some searching via support (search in reolink community doesnt work) the closest match i found was that the cloud option is disabled in europe due to GDPR. Any post or stickied post that i can follow to see when updates
    | keithsrobertson
    0
    2


  • Can you let us know when the new stable android client shall be available? Hope that this is rigorously tested before being released and won't bring additional issues as has been the case with most updates. It is frustrating to have security cameras which will no longer be fully functional following
    | joseph_1979
    0
    2


  • Hello, Bug: Since Android version V4.29.06, push alerts no longer trigger the notification sound on my OnePlus 8T (Android V11). There is a notification and an email but no sound. If we change in the settings -> Notification sound -> Light / Loud or default, the sound is produced. Can you fix this
    | Gsxr38
    0
    3


  • Question: Windows client dont look smooth like android app. I think when i looking monitor and phone at same time, image looks smoother on the phone... I mean moving cars. I think there no problem with my PC i have intel i7, 8 cores, 16gb DDR4 RAM, SSD, and GTX gaming gpu...
    | dg
    0
    4


  • Simple question I hope, just can't figure it out. How do you change the "camera" password on the Reolink NVR by using the PC client (8.7.1)? In the PC client I see the cameras individually in the device list labeled "Not Initialized" When clicking that specific camera, it asks to change the pa
    | KS
    0
    2

  • This topic is deleted!

    Simple question I hope, just can't figure it out. How do you change the "camera" password on the Reolink NVR by using the PC client (8.7.1)? in the PC client I see the cameras individually in the device list labeled "Not Initialized" When clicking that specific camera, it asks to change the
    | KS
    0
    1


  • How do I change the picture the app uses in the detection zone screen. I need to adjust the detection zone but it is showing me a night picture which makes it hard to see anything. I would like it to refresh with a daytime picture but I can't see a way to change it? Thanks.
    | TheTransplant
    0
    2


  • I cannot seem to even get my cameras (410 and 411) to be recognized by the Client software. I have connected directly to a mac and a pc. Am I missing a very simple config step? I have tried IP and UID setup. Client version is 2.1.6 and main OS is IOS 10.11.5
    | Guest
    0
    3


  • I am getting frustrated with every update to Reolink software. It seems that more often than not, you break something that was working fine. For me, I was using app version 4.28.0.8 for Android. It was OK and everything was working fine. Unfortunately, my phone automatically updated the app to versi
    | starfish21_37513982370005
    0
    14


  • I have already contacted support but want to follow up with on here as well. I wanted to add my wife's email to the notifications as well but could not because her email is 34 characters long and the email field only takes 32 characters. I think this would be a simple fix unless there is a database
    | Guest
    0
    8


  • I have an older model RLN8-410. I had it all set up a few years ago, but in 2019 I moved and now in 2022 I've reinstalled it on my new home. When I downloaded the Windows client, it asks for a password for the NVR. On the NVR it says the password is (blank). That does not get me access. It says that
    | weaveb4u_123269961814188
    0
    2


  • Hello, I have 6x B800 cameras connected on NVR RLN8-410 hardware no: N2MB02. All cameras and NVR are updated with latest firmware (NVR- 3.0.0.148; Cameras 3.0.0.183). In NVR network setting I found "ONVIF protocol" option - I turned that ON (I assume this is only support for connecting other camera
    | karlocikovic_208513412940016
    0
    4


  • |

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now