1. Home
  2. Reolink Client & APP

  • This topic is deleted!

    Simple question I hope, just can't figure it out. How do you change the "camera" password on the Reolink NVR by using the PC client (8.7.1)? in the PC client I see the cameras individually in the device list labeled "Not Initialized" When clicking that specific camera, it asks to change the
    | KS
    0
    1


  • How do I change the picture the app uses in the detection zone screen. I need to adjust the detection zone but it is showing me a night picture which makes it hard to see anything. I would like it to refresh with a daytime picture but I can't see a way to change it? Thanks.
    | TheTransplant
    0
    2


  • I cannot seem to even get my cameras (410 and 411) to be recognized by the Client software. I have connected directly to a mac and a pc. Am I missing a very simple config step? I have tried IP and UID setup. Client version is 2.1.6 and main OS is IOS 10.11.5
    | Guest
    0
    3


  • I am getting frustrated with every update to Reolink software. It seems that more often than not, you break something that was working fine. For me, I was using app version 4.28.0.8 for Android. It was OK and everything was working fine. Unfortunately, my phone automatically updated the app to versi
    | starfish21_37513982370005
    0
    14


  • I have already contacted support but want to follow up with on here as well. I wanted to add my wife's email to the notifications as well but could not because her email is 34 characters long and the email field only takes 32 characters. I think this would be a simple fix unless there is a database
    | Guest
    0
    8


  • I have an older model RLN8-410. I had it all set up a few years ago, but in 2019 I moved and now in 2022 I've reinstalled it on my new home. When I downloaded the Windows client, it asks for a password for the NVR. On the NVR it says the password is (blank). That does not get me access. It says that
    | weaveb4u_123269961814188
    0
    2


  • Hello, I have 6x B800 cameras connected on NVR RLN8-410 hardware no: N2MB02. All cameras and NVR are updated with latest firmware (NVR- 3.0.0.148; Cameras 3.0.0.183). In NVR network setting I found "ONVIF protocol" option - I turned that ON (I assume this is only support for connecting other camera
    | karlocikovic_208513412940016
    0
    4


  • Before the last update I used to be able to switch to 4 camera split screen view by zooming smaller than 100%, now however it just makes the image smaller until I let go when it zooms back to 100%. This is an annoying loss of functionality how can I quickly switch to multi camera view now ?
    | SPFLMF_288692412260538
    0
    4


  • Hi, is anyone using Zoneminder with their Reolink cameras? I have tried to configure Zoneminder to use the RTSP stream, but I can't get it to work. The RTSP stream from the cameras is working with other software, but Zoneminder is a little bit complicated to configure. My configuration is shown in t
    | mhopeng_6864222344
    -1
    14


  • Re: No two-way audio with C1 Pro + Synology NAS Maybe I’m sad today. Maybe there are eight different reasons I can be sad today. Maybe some of them are important and some of them aren’t. But I get to decide how important those reasons are—whether those reasons state something about my character or w
    | singhisking9371_307081656353021
    0
    1


  • Hello to all I'm just installed reolink software on my computer and app version on my smartphone. In both version, it's impossible to review registred moment or in others words, it's impossible to switch from one registred moment to another... I want to clik to specific day and to a specific time
    | lebloemstraete_486249794388175
    0
    2


  • Hi, I want to stopp the recording of my cameras if I am or other dedicated people are reaching my home. The idea would be to combine it to the dependent mobiles in the local WIFI. Are there any ways available in that direction? I am using the RLC-523WA and the RLC-511WA. Any help would be heavil
    | gerhard_501162179805422
    0
    2


  • Hi! I can't access my cloud. It is an error 404. Please tell me what is meant that?
    | laureanrotar_499595809001647
    0
    2


  • Hello, I have a Volkswagen T-Roc with Android Auto system and a OnePlus 8T. All software versions of car, phone and Reolink are up to date. I connect my mobile to the car via Bluetooth and I can use Waze, Maps, etc... But if the alarm activates (push) on the Reolink app, I have no sound, no notif
    | Gsxr38
    1
    3


  • Using the Android mobile app, how do you add a PoE camera? The only method that seems like it may work is by using the IP address. But in my case it is not working. Reolink product is: RLK8-510B4-A Note, that in the mobile app, I can access the camera as an element in the NVR. But, that is not
    | dpitman_483600681218222
    0
    3

  • This topic is deleted!

    "Scenes" on the mobile app looks great. But I cannot get scenes to play nice with the NVR settings. In a scene, I set record and email notification to ON, but nothing will be sent if those items are currently turned OFF in the NVR. But, if I turn them ON in the NVR, then if motion is triggered, not
    | dpitman_483600681218222
    0
    1


  • Hello there! Im using multiple Reolink GO PT - Cameras for a TV-production. In the Reolink software im watching the videofeeds from different cameras i have connected. The problem is that if i stay in fullscreen and surveying a camera it will pause after a while since "nothing happens". A pop-up sho
    | Haldor H Jøsendal_496801484447987
    0
    2


  • I have been using the new 8.7 since it was announced. When you have four cameras visible in full screen mode (or just when the app initially starts) the view of the cameras is fluent (which you can change if you want). When you double click on a camera it takes the view to full size an increases re
    | neil_chaplin_is_450076909830276
    0
    2


  • hello, would like to ask to improve the feature of "movement detection" (push) by enabling possibility for us user increasing configuration settings more individually as the Push feature is sending way too many notifications when e.g. only the sun comes up and steady moves... (is already set to leve
    | Defcon_274148371144872
    0
    2

  • This topic is deleted!

    The e-commerce website is one of the most crucial aspects of your business’s online presence and it’s important to have the right design that suits your business model. You should consider an expert and professional ecommerce website development company for you website. They bear in their mind your
    | PaulLopez_494443078697107
    0
    1


  • |

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now