• While attempting to add a second camera, I was having major problems setting up the wi-fi. I plugged in the camera and the ethernet cable. Every time, I was successful setting up the wi-fi, but when I unplugged the ethernet cable, I lost the picture. After six hours of trying to get it to work and e

  • Hello all. I recently setup the Reolink 8 camera system and so far, everything's working pretty good. Is it necessary to update firmware if no problems exist and has anyone noticed any improvements after the updates?

  • Has anyone tried using 2-16650 batteries in their Argus camera? They seem to have the same dimension to fit the camera and with the higher capacity of 2500mAh each makes it a much better rechargeable option than 4-CR123A rechargeables, which at most have a capacity around 800mAh each.
    0
    8

  • Anyone who comes to my door knows that they are being watched (I have various cameras at each entrance point). I have reolink stickers on my windows to also further deter criminals. Statistically, fewer homes are broken into that have security signs or stickers (even if they don't really have a secu

  • So I understand Reolink will be coming out with an Argus Pro that has a rechargeable battery. Wish I knew this prior to buying into the regular Argus.
    0
    1

  • My replacement Keen arrived today, the previous one had no audio out of its speakers. The replacement camera setup worked as advertised, but now I have a new issue. I'm trying to delete the previous camera from the app and it won't let me, says "Please disable push for this device first." I went int
    0
    3

  • Hi I am using the Reolink app on android, please can you add a feature to cycle through cameras at set interval. Other CCTV software / NVRs have the ability to display full screen and cycle through at set interval of say 10seconds

  • Trying to setup my Keen, after installing the batteries there were no voice prompts. Opened the app on my iPhone and added it scanning the QR code on the camera. Went to Set Up Camera and still no voice prompts. Followed the instruction and reset the camera, still nothing only a solid red light on t
    0
    2

  • So I recently purchased a C2 camera for the inside of my house, was going to purchase 3 or possibly 4 411s for the exterior and an 8 channel POE NVR. Can I hook the C2 up to the NVR to record 24/7? Secondly could I use the Ethernet on the camera as power as well or would I still have to have the pow
    0
    1

  • My Argus camera's seem to not be recording PIR events from my pets in my home. They will send my phone an alarm push notification, yet no recording file is found. The SD cards have plenty of room and when I test the camera by moving in front of them, it records me. I'm thinking if the PIR event is m
    0
    1

  • Hello, Is it possible that a RLC-420 has no UID ? If Yes, how to Get one ? I tried to factory reset the Cam, to update Firmware to latest yesterday, but whithout success... As shown in the attached picture, the "ASCENCEUR" has no UID, then We cannot monitor it via the Android App. Thank you for
    0
    4

  • Hi, Is there a way I can get the UID of the cameras attached to an NVR remotely. I didn't take photos of the individual cameras before installing and have a couple of issues that may need RMA. I'm remote from the cameras but have full access to the NVR via client apps .. thanks in advance.

  • I'm hearing that there is a firmware update for the Argus. What does it change? Three of my cameras have firmware 0509_2057-2051-2 and two of them have 0605_2089_2051_2.
    0
    4

  • Hello all, I hope you can advise. I have a 2 month old RLC-410S. It's been operational for about 5/6 weeks. I have a 4 port POE hub and have run an outdoor Cat6 cable to the camera. I have a basic RJ45 crimp tester which shows each pin is connected at each end. The Camera works flawlessly in terms
    0
    6

  • I noticed a new upgrade was available for my new Reolink Argus to version 0509_2057_2051_2 but every time i try to upgrade it gets to 57% then says Upgrade failed on my android phone Screenshot_20170614-170310-1-1.png
    0
    5

  • Sorry everyone, not sure which forum to post this in. I just purchased 7 outdoor cameras along with the 8ch NVR. So far I love the system but there are some things that I cannot figure out. First off everything is setup properly and working great. First problem-I am using only MAC and when using the

  • I am looking to create a system using a separate network switch for 3 of the cameras that have longer runs. The attached picture is what I am thinking. Can this model NVR be used with a network switch for 3 of the 8 cameras? Will the NVR be able to see/connect and record the 3 cameras on the separat
    0
    4

  • Is there a way either physically at the camera or via the software to turn the camera off other than pulling the power plug on it.
    0
    2

  • I've put up a couple of RLC420 by ay of a test and am using a Synology NAS box to store images. So it started recording fine for a couple of days and has now stopped. The NAS has lots of spare space (over 3TB) and I cannot see any settings that would cause this. Any ideas team?

  • Hello, Does Reolink have an nvr that can handle 4 or 8 of these (RLC-411WS) cameras and record in full 4MP @30Fps ? the in camera sd card is nice but i want to record for 1 or 2 weeks at a time 24hrs a day 7 days a week. Also on a side note reolink desktop software seems to limit the fps to 25 whi

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now