Posts made by joseph_1979

@user_764085690396801_764085690396801 Patrolling is not available on TrackMix as stated in specs. Only tracking is possible. To check whether patrolling shall be made available on the Trackmix, I suggest you to email Reolink support.

@p0zeta20_671917366853819 This is what most of us are after. To start having cameras with F1.0. Let's see when we shall have them. Patience :).

@kyra_lan Thanks a lot. People who are crazy enough to think they can change the world in security, are the ones who do. So do it Reolink.

@user_689033448374468_689033448374468 That's on channel 2. So use rtsp://admin:PASSWORD@IP_CAM:554/h264Preview_02_main ...... or sub

@drat_762739289403611 Good to know. Thanks.

@karschti_637593818415162 For the DUO 2, it consumes on average around 4.8W during the day and 9W when the spotlight is activated. For the TrackMix, the average day power consumption is 5.3W and 9W when using the spotlight. There is a slight difference between using the IR lights and the spotlight. The IR lights consume around 0.4W less than the spotlights.

@user_764785147752600_764785147752600 Normally we untag the 'any motion detection' in record/email/push notification. For instance I only enable the AI detection, namely, person, vehicle and pet. Or else leave the 'any motion in record' but untag it in email/push notification.

@ranch-security_151174218559734 You need to reposition the camera away from the external light.

@user_711725607157890_711725607157890 I know that the Reolink doorbell can be paired to 5 chimes. But I don't know if 2 doorbells can be paired to the same chime. I suggest you to email Reolink support.

@user_711725607157890_711725607157890 I haven't seen anyone who has paired Reolink doorbell to this chime. I only have seen members paring Reolink doorbell to KERUI chime.

@user_732475412443337_732475412443337 I tried to get the ability from the Floodlight using curl function and it seems that ports 80/443 are closed. Maybe they don't allow us to control it. I don't think it is possible, Try to email support.

@user_732475412443337_732475412443337 If you switch it on manually then you need to switch it off manually. No timer is triggered.

Try to switch it on with the curl commands i cited in another post. However, on Windows client 8.1X.Y, the standalone floodlight is no longer supported. So you need to install an older version say v8.8.5 and activate https as it may be disabled.

You can also search in the community for the API document v8.

@nick_26792935116 They need to improve in testing and coding resources otherwise the competitors will take over this niche,

@phirephoto_633457091563556 Have a look at this https://www.reddit.com/r/reolinkcam/comments/wr556l/rln8410_nvr_working_with_14tb_hdd/

@user_732475412443337_732475412443337 If standalone, go to light mode and there is light duration which can be adjusted between 3s and 3min.

@user_689033448374468_689033448374468 You're welcome.

@user_689033448374468_689033448374468 See my reply in https://community.reolink.com/topic/6366/reolink-8mp-trackmix-wifi-2-camera-s-rtsp

@pedrofsilva_762258334912663 Three months ago they asked us to provide our feedback on improving the scene mode. We have requested a flexible scheduler together with status. We also ask for geofencing too similar to what other brands have. However, I didn't see any updates on this development.

@big_ted They need to synch and communicate better. We can offer lecturing ......

@bfeliciano_416958891729142 That's because it is 4MP and this has an aspect ratio of 16:9 as illustrated below. So only the 5MP has the aspect ratio 4:3.