Posts made by joseph_1979

@wolfgang_789771938767034 Just disable push notification on the doorbell for any motion and persons. Note that the sound is generated by your smartphone upon the reception of the push notification from Google FCM. Just leave it for visitor as illustrated below.

@grantiago Only the scheduler is available unless you need to use an API. And recording is available not just picture.

To have a picture then use either the email or ftp.

@laurent-rullier_363104639807654 If the POE switches are connected to the router, connect the NVR LAN port to the either the router or to any of the POE switch. Then be careful about the DHCP if this is activated on the router. You can have one DHCP on a network unless you are quite competent in networking.

eg

@it_484462163448014 enable http and https from networks. After upgrade both http and https are disabled.

Use windows client.

@user_793110460846229_793110460846229 I don't have Alexa and so can't assist. I suggest you to email support at support @ reolink . com (delete spaces as the site won't let me to include email addresses).

Moreover, I do suggest you to ask the Reolink users on reddit https://www.reddit.com/r/reolinkcam/ . There are a lot of customers who have integrated the doorbell to Alexa.

Check this out https://www.reddit.com/r/reolinkcam/comments/172k3h8/doorbell_issues_with_alexa/

@user_750021959827684_750021959827684 Not yet. Everyone is looking forward for this new firmware to test out.

@c0nfick3r_781404561744056 I suggest you to send some videos in clear mode to support so that they can refine their detection algorithm.

Can you try to experiment with minimum and max object size?

@grantiago There is no such configuration.

@user_792702754615469_792702754615469 that's why the false alerts because of the high sensitivity for the smart detection. The higher the value the lowest resemblance. Set between 50 to 65.

There are two sensitivity settings.....one for any motion and one for smart detections.

@user_792702754615469_792702754615469 What is the sensitivity for smart detection? The one you showed in low is for motion detection.

I see 3s is a bit too much and I will use the object size too. You need some patience till you find the optimal setting.

@schuzili_761593036189872 It seems to be a common issue on all the E1s. I have the E1 Zoom and the E1 OD Pro and the audio is sometimes being recorded underwater. I did reported it but didn't get any fw with improved audio.

I suggest you to email reolink support. The more emails they get on this, the higher the probability to fix it and improve their audio recording.

@iallinoro_169065503625461 Ben ogni tanto succede. Allora lui sta uzando la versiona nouva. Io non ho avuto mai la problema di vedere il stream.....ma di funzione si. Il tempo di fare tanti test prima di lanciare e' ormai passato. Cost savings and less human resources......and of course talented engineers. I see this from the new engineers being recruited within my department. But this is life.

@thomas-oneill_306809385144533 Thomas, I don't have this NVR and so I cannot provide a solution. However, there are users at Reddit who have your setup and may assist you. Go to reolink reddit.

@user_792781723140271_792781723140271 fw still not yet released. We are all waiting for this to check out.

@macartan-mcquaid_30924514265 I suggest you to email support at support @ reolink . com (delete spaces). I don't think that Reolink dev team checks the site.

@iallinoro_169065503625461 Di niente. Non so il perche' ci sono tanti problemi con i nouvi clienti. Io sono un consumatore come te e sono qui ad aiutare. Mi mancha l' Italia..... Ho lavorato a Roma.....ad Anagnina..........203.

@user_792702754615469_792702754615469 Can we have screenshots of your setting please?

@chris-m_782570790420725 Correct. I am a customer like you. European have different philosophy.

But E1 Pro is not battery operated and subsequently can be connected as you have discovered.

@chris-m_782570790420725 Reolink battery operated cams cannot be connected to any NVR.

E1 Pro is not battery operated cam and thence can be connected as you described.

@alessandro-docali_515548544553168 Reolink client? Sai quale e' la versione?

Se e' 8.8.x ... basta toglierla dal direttorio Program ... x86 se non la vedi dal uninstall program. These clients were complied for 32bits Windows. Versions 8.1x.y are 64 bit clients.