Posts made by joseph_1979

@grga-komadina_356799291056358 I have seen another customer complaining on the same issue. Which client are you running?

Can you do the following?

Take note of the UID for both the local and remote cameras. Delete both cameras from the client and disable 'Auto device adding' from the client main menu. Close the client. Re-run it and add the cameras using the UID. Close client and run it again.

@user_639868941582417_639868941582417 Try to untag 'Any motion' in recording and base your detections on person and vehicle. As for the noisy fans, I have read comments written by customers who replaced them with more silent fans from Amazon. If the ambient temperature gets higher the processor temp may increase and may impact its operation. So keep monitoring.

@bob You need to access the Webui through a browser......... then click upper right wheel icon and go to Networks and click on HTTPS as illustrated below. If TLS is involved irrespective if local or external network, the server validates that the self-signed certificate came from the client who self-signed the certificate in mutual TLS (using the public key contained in the certificate) and the client attempts to verify the server's certificate too. If you are local try to remove TLS.

Kindly note that I am a customer like you and I am here to provide support wherever possible based on my engineering skills and software development.

@blf See my reply at https://community.reolink.com/topic/6382/live-view-starts-with-low-resolution?post_id=24487&_=1692346743392

@bob Did you try to import your certificate?

@blamaz_553204517843116 They should ping the default gateway if there is no other scope we are not aware of.

@renaud-hx_437082136477858 You're welcome.

@boss06518_449790654218427 you're welcome.

@haleyeah64_520713375768739 Please submit your suggestion to Reolink support https://support.reolink.com/hc/en-us/requests/new/

@boss06518_449790654218427 Just have a search for '12V 4A with 2 way splitter' and you will find at Amazon.

@user_726158772113569_726158772113569 Unfortunately this is how it works on this version. I recall a version which led me to the recorded clip. I have reported to support but didn't get any feedback on when this shall be implemented. I have also requested that when playback is selected, it should take us to the last recorded clip and not to 00:00.

Please submit a request to Reolink support.

@renaud-hx_437082136477858 Buon apre-midi. I change to French as I have forgotten most of the words.

Your NVR is rather old and the doorbell poe is compatible with the NVR listed in this article https://support.reolink.com/hc/en-us/articles/12703727549721-FAQs-Video-Doorbell-PoE/#:~:text=Does%20Reolink%20Video%20Doorbell%20PoE,system%20information%20of%20the%20NVR.

Other than not detecting the doorbell button when pressed, it will not support the two way audio and AI person detection. So what other solution you have? Well you need a POE injector or a POE switch which shall allow you to have the doorbell connected to the BB router and you can access it directly with your Android/IoS smartphone. In this setup you shall have access to all features. Note that you can still record to the NVR.

@r-c-maeder_691806499725573 Kindly forward your request to Reolink support on https://support.reolink.com/hc/en-us/requests/new/

@skeptouchous Indeed it will assist Reolink customers.

@Reolink-Lorenz Kindly forward this request to the dev team. Thanks.

@user_713404410871982_713404410871982 Yes, directly connected to one of the 8 ingress ethernet ports. In this configuration you cannot share individual cameras but ALL of the cameras. Similarly when you activate push notification it shall be to all cameras and similarly to email notification. More flexible to update individual cameras too and you have to scene mode to activate/deactivate certain cameras. But anyhow keep the current configuration and if you need such features then add a switch. Note that this is valid as long as the camera has the UID. If you bought it as a kit then it might be that your cameras don't have a UID and so the features I mentioned are not applicable.

Always check for firmware updates related to both the cameras and the NVVR and may check them at Reolink Download Center.

@claytonrice_397473179595004 I thought you already did the deletion and creation of the devices like the previous customer. I did ask Reolink support to include older firmware and clients as this is requested by many customers. I am a customer like you and I am here to give support based on my engineering/software skills.

@claytonrice_397473179595004 Check this https://home-cdn.reolink.us/files/client/electron-release/reolink_setup_8.11.0.exe 

@claytonrice_397473179595004 Check if you have it in the download folder?

@jjacq You're welcome. Enjoy.

@user_726829142737134_726829142737134 Depends on the bitrate and the frequency of detection.

https://support.reolink.com/hc/en-us/articles/360008997773-How-Much-Data-Does-Reolink-Go-Need-in-Normal-Usage/#:~:text=Reolink%20Go%20Plus%2FGo%20PT%20Plus&text=to%20512%20kbps).-,Under%20default%20settings%2C%201%20GB%20of%20data%20can%20be%20used,a%20month%20should%20be%20enough.