Posts made by joseph_1979

@perkins-tony_647500713214819 I do have a lot of models including this wifi doorbell and have no issue at all. Did you check the firmware? You are using the power adapter provided by Reolink. When it is working can you use the talk function and see if it reboots?

@perkins-tony_647500713214819 How do you know it rebooted three times? There is no logs available to users and the export of diagnostic file has been removed.

Rebooting is normally either a power or hardware issue. I have even came across users who fail to seal the reset cable and when it rains it causes rebooting (shorting reset button).

i think you have exhausted all the tests and the best way forward is to ask Reolink support for a replacement.

The firmware of my wifi doorbell is v.3.0.0.2033_23041300. What is your firmware?

@user_697103498285261_697103498285261 Orange is included........ https://reolink.com/product/reolink-go-pt-plus/?jumpId=product-carrier-table&_gl=1*m8xwxq*_ga*MzI3NTUwNzk5LjE2ODE0NTg4NjI.*_ga_Q2NV1EV2K8*MTY4NDkzNzg5My40MS4xLjE2ODQ5Mzg4MjQuMC4wLjA.#specifications

As long as it supports the LTE FDD: B1/B3/B7/B8/B20 I cannot find a reason why it shouldn't work (assuming no FW rules at operator side).

@ks Try to install WindowGrid.

@zeiler013_629166505078864 I am on 8.10.4 and have it as illustrated below.

@mrfchirpy_328132979335308 Check this out https://support.reolink.com/hc/en-us/articles/900002049806-Failed-to-Connect-Reolink-Lumus-in-LAN-/

@user_695538183594167_695538183594167 For email follow these links https://support.reolink.com/hc/en-us/articles/360039461654-How-to-Generate-an-App-Password-in-Gmail-Account/ and https://support.reolink.com/hc/en-us/articles/360004189434-How-to-Set-up-Email-Notifications-via-Reolink-App/

For push notification follow https://support.reolink.com/hc/en-us/articles/360004189214-How-to-Enable-Push-Notifications-on-iOS-and-Android-Phones/

@user_696949782040758_696949782040758 If not listed then email Reolink support. Please include your hw and firmware versions.

@perkins-tony_647500713214819 Excellent. This should eliminate any power issue. Have a nice day ahead.

@colovin_541922116624611 Seems that the P2P server is not updated with the IP of your camera or there is FW in your network. You confirmed that the UID is enabled on both cameras. Take note of the UID (9527000....). Switch off the wifi of your iPhone. Run Reolink client and add the camera using the UID. Is the E1 OD directly connected to the NVR? This means that you can access the camera through the NVR only.

I access all my cameras directly as I do not need an NVR for the moment.

@jfrederickx_531421351882978 They change the strategy. Argus 3 Pro is AI and so you need to use the schedule under 'camera recording'. If you wish to receive emails or push message notifications within a time window then you need to use the schedule under 'Email' and 'Push Notification'. In both cases you can select the detection type, any motion, persons, vehicle and Pet. I switched off any motion to mitigate false alerts. Hope this helps.

@perkins-tony_647500713214819 Correct.

@perkins-tony_647500713214819 I think it is protected as show in https://support.reolink.com/hc/en-us/articles/10300451805465-How-to-Power-Video-Doorbells-Using-Power-Cables-/ and https://www.youtube.com/watch?v=wR3oOPA8-rU

@santiagopiazze_547986408206551 Check out this link https://support.reolink.com/hc/en-us/articles/360012466173-All-Reolink-Client-Versions/

@jfbaro_664228245382261 AV1 could be the future of codecs, but older codecs like H.254 and H.256 have their merits as they offer better compatibility and lower encoding time on current hardware.

@jfbaro_664228245382261 facial and license plate recognition still not yet in the roadmap announced by Reolink. Facial and license recognition require substantial processing power and storage and so this entails for a home base unit which Reolink don't have so far.

@perkins-tony_647500713214819 That should be fine. And this is the second reolink doorbell right and yielding same symptom. I still think there is something wrong in power. How about feeding it with the provided power adapter? Just to test and eliminate AC power.

@user_684685147787494_684685147787494 Yes you can. Check out this links https://support.reolink.com/hc/en-us/articles/900000580003-how-to-View-Multiple-Streams-at-the-Same-Time-on-Reolink-App/ and https://reolink.com/blog/connect-raspberry-pi-to-ip-cameras/

If you have a power outlet in the vicinity, I suggest you to have the dc power DUO 2 rather than battery operated DUO 2.

@perkins-tony_647500713214819 What is the secondary VAC of the transformer? For Reolink doorbell it has to be 12-24VAC 50/60Hz.

@jfbaro_664228245382261 Not yet. No dates provided so far.