Posts made by joseph_1979

@user_798408209101051_798408209101051 Kindly submit your requests to support on support @ reolink . com

The more requests they receive the more we see such features being implemented.

@big_ted yeah...I didn't check the specs as I was handling a call.

@user_842182319931583_842182319931583 Yes, that's the solution when you have two graphic display drivers.

Since they changed the client to 64bit, the parameters are stored in other logs.

@colin-brown_341151587041437 We have been asking this for years and we still waiting for. Submit your request to support on support @ reolink . com

@vogel_284858079064306 check this out https://www.reddit.com/r/reolinkcam/comments/kn53d0/network_cable_wiring_question/

@blueflyer49_779987971661962

You cannot have continuous recording on battery cam due to battery draining fast. So the detection is based on PIR which has a max range of about 10m if sensitivity is set to max. This means that only the PIR circuit is consuming current from the battery. Once motion is detected it will start the application to analyse object and start recording and send email/push notification.

So I propose you to set the pir sensitivity to 98 and set the sensitivity of the other objects say to 60 or 70. You need to tune the best settings. Remove any motion or other from push or email as you will be bombarded with messages. Just tag pet, persons and vehicle.

@160334357029011 I have the RLC511WA and has a 256GB SD as per specs.

@rol_640066282610764 The fw is too old and there is a newer version as illustrated below. Go to their Reolink Download Center and download the fw. Follow this link to upgrade the fw of the NVR https://support.reolink.com/hc/en-us/articles/900003659286-How-to-Upgrade-Firmware-via-Reolink-NVR-New-UI-/

@user_825853216972936_825853216972936 So far the NVR will not handle the battery operated cams. But it is coming.

@colin-perriman_493164643934452 The UID should be correct unless you didn't swap or replace the battery.

You can follow this link https://support.reolink.com/hc/en-us/articles/9327020086809-Getting-Started-with-Argus-2-Argus-Pro/

@makofi-security_686092416798871 which cameras and which NVR?

@user_841046221082755_841046221082755 it should work on both. If the distance between camera and transformer is several meters away then I will connect it to the 24V output.

@user_836958064107727_836958064107727 What is the fw version? Are you using the Samsung S24?

@user_840832707350769_840832707350769 send an email to support on support @ reolink . Com

I installed the RLC 811WA and didn't use any template. Just mark the holes with a pencil and drill.

@nsk This has been requested.

@colin-perriman_493164643934452 Should be on the sticker. Otherwise you need to bring it in operation and get it from the Info menu.

@noble64_240089957404909 So your client and the cameras are running on a different subnet. In this case the CLEAR mode is not stored after changing the view window. This is because the client uses the 3rd party P2P relay servers provided by AWS/Azure.

@tomsreolink That's what the text implies. However, before you commit yourself I suggest you to email support on support @ reollink . com.

@reolink-daisy C-NVR is the best option for many reasons. Just fully integrate the battery cams and add more features and that's all.

@reolink-daisy Time to have the Home Hub Pro with more cams, more storage and more features.