Posts made by joseph_1979

@rui-santos_493483414995146 I did more tests and didn't hear any noise interference on the TrackMix WIFI. What I noticed is the volume has been reduced.

@user_794450589253883_794450589253883 I did request these features and more for a year now. I suggest you to submit your request to support on support @ reolink . com

I asked for the following implementation.

1. add protection zones per detection type together with schedule
2. add schedule to sensitivity for each detection type
3. add schedule to siren and spot light for each detection type
4. add schedule to push notification/email/ftp for each detection type
5. add schedule and status to shortcuts
6. add schedule for the chime for each detection type

And this is all software. Routines are programmed once and they can me added to any model.
Hopefully one day we shall see them. Fingers crossed.

@reolink-daisy I did update to 4.47.0.5 from 4.47.0.4 and would say didn't encounter any major issues. What I noticed is that the audio is slightly less clearer and volume is a bit low.

As what should be added, I refer to the guy in Reddit who listed what features should be implemented.

@md Agree. Windows client is not meant for 24x7 recordings. Best option is to go for an NVR from same supplier unless one is knowledgeable and opt for an HA which can handle a multitude if devices.

@arlock_og I suggest you to submit your request to support on support @ reolink . Com

@dave_wat_ So for the camera which you are not able to see, get its UID from the info menu. Then on the smartphone, switch off the WiFi and enable mobile data. Run the client and delete this camera. Then add it again using its UID.

@anlau_746745411707081 Yes it's normal. What is your disappointment if I may ask? Perhaps the calling feature which is not what customers are looking for. I asked support several times to implement the calling feature using VOIP. They need to have sip servers at their end and add a SIP client to both the doorbell and the Andoid/ios clients.

@user_657449905848424_657449905848424 Good question.

@Daisy: Can you answer this please?

@user_726740213256441_726740213256441 I never had any issue to connect to any of my cameras after an upgrade. So from the application point of view there is no issue as otherwise there would be an avalanche of complaints. The issue is normally at transport level which encompasses a number of entities between the cameras and the smartphone ( BB router, any fw rule on the router, upload bandwidth, any restrictions on the ports at ISP, mobile PGW, SGW, etc).

From what you wrote you are using a VPN tunnel. So you are connected directly to your VPN server at home and skip any fw rule. Therefore check for any fw rules on the BB router.

@rui-santos_493483414995146 They will solve it as they did for other issues. If I have the source code I already did it :).

@dave_wat_ Just as illustrated below.

@kylimo_837175850053876 what do you mean by pictures? Can you paste a screenshot?

@johnny2064_368119747915946 Agree. We did suggest this in a survey on shortcuts (previously named scene mode). I suggest you to submit your proposals to support on support @ reolink . Com

@workoholicspam_335979423842535 I suggest you to email support on support @ reolink . Com

@rui-santos_493483414995146 I just upgraded the client on one of my smartphones and noticed a degradation in the audio. Seems they added some digital artefacts to make it continuous. I need to do more tests when I get home.

@user_844373869711561_844373869711561 Try yo install Cerberus ftp server on your Win machine. Create a user account and grant all permissions. The ftp server gets an IP from the DHCP of the router...you shall see it on the right hand window.

Now go to configuration...protocol and enable update to TLS.

From the home camera....enter the ftp ip and credentials of the account you created on ftp server. Once finished do a test from the camera. On the ftp go to logs to see the commands exchanged between camera and ftp server.

So this should work for the case when ftp server and cameras are on the same network.

Now we need to get it working for local and external networks. We need to use DDNS. You need to get a ddns account from a site of your preference which provides this service....free. then you need to have this added to your ftp server and the camera. This is because the IP assigned to your BB router is dynamic and can change. So here comes the use of DDNS. Here the ftp server will be sending HB packets to the DDNS service to update the source IP.

You also need port forwarding on the BB router. You need to forward port 21 traffic to ip of the ftp server.

..... and I tried to add comments to your questions but site didn't allow me...pity..

@dave_wat Using the Windows client, log on camera and go to network/advance and check that UID is enabled.

If this is enabled, are you having this issue when you try to see them all or individually?

I guess you don't have any fw rules or using VLANs.

@reolink-daisy Fantastic deals...keep them coming.

@reolink-daisy Apart from higher storage what other features will customers be benefitting from the pro.

@reolink-daisy They showed up from the first game.

Kindly take it up with the site programmer to restrict such spams as it is irritating members. There are a number of issues on this site which need to be addressed.

I am at reddit too and haven't seen any issue. And the participation is great.