Posts made by joseph_1979

@user_657668497326169_657668497326169 Check out the Trackmix. This is my fav and never had any issue. Any particular requirements other than vandal proof.

@user_606336578228256_606336578228256 Can you try to delete the camera and add it again? I think if you move the mouse slowly at the bottom they might pop up. If still unable to get them back then install version 8.8.5 until it will be fixed.

@user_704507809738906_704507809738906 Check out this link https://support.reolink.com/hc/en-us/articles/9594848355865-Troubleshooting-for-Argus-Eco/#:~:text=If%20you%20find%20the%20camera,start%20to%20set%20it%20up.

@user_704522064679100_704522064679100 Restoring/Resetting the camera will set the parameters to their default factory values with the exception of the WIFI settings. This is done purposely as otherwise you will have to bring down the camera and connect it to the router and set up the WIFI configuration..

@user_657668497326169_657668497326169 Check out this link https://reolink.com/product/rlc-842a/?gclid=CjwKCAjwyqWkBhBMEiwAp2yUFn3npyN31SObzYbdf3yhhH361SKNQ9gz1BngddesVJhRgXNq_D59aBoCb1gQAvD_BwE

@jm_fort_525559425302685 It is still there as illustrated below. Can you check that you have recordings? I am using v8.10.4.

@thornton_620874794598455 A42 is working fine. Perhaps you can update the client on this smartphone. On S20fe there is something wrong. Can you install an older version on S20fe? Email Reolink support for an official older android reolink client.

@steve_701706398327000 I do know that detection zone per object type has been implemented on Argus 3 Pro and DUO 2 respectively. I did request that this should be implemented across all the AI models and possible to add a scheduler per object type. This is all software and the routines have already been implemented on other models and so it isn't that difficult (assuming enough memory and processing power)

Try to email support and request it.

You might opt to record but exclude vehicle from push notification.

@user_704102555316464_704102555316464 Do you have any FW rule on this server? Which Windows server are you running?

@steve_701706398327000 Use detection zone as illustrated in https://support.reolink.com/hc/en-us/articles/900003638406-How-to-Set-up-Motion-Detection-Area-via-Reolink-Client-New-Client-/

I don't have this model so I cannot tell whether it has one global detection zone or a detection zone for each detection type.

@user_704102555316464_704102555316464 Try to disable the hardware acceleration first from the main menu of the client and re-run appl.

@thornton_620874794598455 Perhaps you can email Reolink to forward you an earlier version of the Android client or else update the one running on A42 to 4.37.0.6. I have no issue with this client other than the missing stretch mode live view for some cameras like E1s and RLC511s.

@thornton_620874794598455 I am running 4.37.0.6. What clients are you running on both smartphones?

@thornton_620874794598455 So this means that the cameras are sending the alert to the Reolink pushx server which in turn is sending the push request to FCM and FCM pushes the message to the A42. So there is something within the S20fe environment. Did you upgrade the S20fe lately? Are you running the latest Android?

@user_703793344291048_703793344291048 Eh........ they now support ECDHE (Elliptic curve Diffie–Hellman exchange). Cerberus accepts both ciphers.

s@user_703793344291048_703793344291048 So you were using the FTP rather than FTPS. Then email Reolink support and inform them about this.

@user_703793344291048_703793344291048 You see that cipher shown in your reply is not included in Filezilla. If you add it then it should work.

@user_703793344291048_703793344291048 Just to test it out can you add the ciphers I listed below. It shouldn't take you long but save the file before doing any changes. I see that the cipher is not found in the Filezilla config.

@user_703793344291048_703793344291048 I think there is an issue on Filezilla sever when using FTPS (explicit). Try if it works on Cerberus ftp server (free).

Try this

1.(A) Shut down the service part of zFTPServer.
2.(A) Open Settings.ini in the zFTPServer directory
3. Go to the [FTPS Ciphers] line. Below are the ciphers zFTP offers for negotiation.
4. Go to the end of the line listing the ciphers, and before the terminal double-quote, add:

[FTPS Ciphers]
"<List of other ciphers>,DHE-RSA-AES256-SHA,DHE-RSA-CAMELLIA256-SHA,DHE-RSA-AES128-SHA,DHE-RSA-CAMELLIA128-SHA"

5. (A) Save the file.
6. (A) Start the service again.

(A) means administrative privileges required.