Reolink updates Learn More
Meet Reolink at IFA 2024! Learn More
Reolink Q&A Learn More
Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
@seb_526812765704330 I have informed them too. If I have the source code ( I program in C++) I will also add the schedule when it is triggered by motion or cameras. few lines of coding..... It doesn't make sense to switch on the floodlight at daylight.
@seb_526812765704330 I did tested it out and confirm your findings. In my opinion it should not switch on during daylight. Reolink informed.
@kip_46655195393 How are the sites connected to the host? And what camera models you have at each site? What is the connection (1G fibre patch) between the router and the host server? So if we assume a 4M pixel camera (Requires 8Mbps bandwidth if using H.264) then you will need at least 3G bandwidth between the router and the host. If you are recording on 24x7 at high resolution then you definitely need a 10G IP backbone. I would use two routers and would take into consideration the server redundancy. Raid 10 is a good choice for this scenario.The freezing issue. Did you manage to monitor the processes/resources during the instance the application freezes? Can you pinpoint which resource is being used mostly? As a test I would set all the cameras at the lowest resolution/fps and bitrate and even switch off the hardware acceleration first from the main menu of the Reolink client (here you shall see an incremental cpu load but should be OK). What PC are you using? I have VMware on HP G10 and have no issues of resources but for different applications. I use vsphere to monitor.Another suggestion would be to run the cameras on client version 7? Just give it a try. This seems to use less resources and the code seems efficient. Just to test.And another suggestion would be to use ONVIF and use a 3rd party client.What was the reply from support?
@letandemetlavie_510638925045941 Go to their download center at https://m.reolink.com/download-center/ and get the firmware.
@seb_526812765704330 Would the floodlight switch on when you walk across its PIR during daylight? If yes then email Reolink support to send you a newer firmware of the floodlight and you should be able to adjust the ambient light when the floodlight should switch on.
@ianh_684667170234560 Follow this link https://support.reolink.com/hc/en-us/articles/360020644034-How-to-Add-Reolink-Cameras-to-Google-Home/#:~:text=Launch%20the%20Reolink%20App%20and,will%20be%20shown%20as%20Unbind.
@kweckstrom_652263608210296 H.264 and H.265 are both standards for video compression used in recording and distributing digital video. The main difference between H.264 and H.265 is how each processes information and the resulting video file size and bandwidth consumption used with each standard.H.264 processes frames of video using macroblocks, while H.265 processes information using coding tree units (CTUs). CTUs process information more efficiently, which results in a smaller file size and less bandwidth used for your streamed video. So most manufacturers opt to use H.265 for high definition which requires less bandwidth and storage space. So if the definition is higher than 1440p they opt to use the H.265. However, they can still use the H.264. There is no adamant rule.The higher the resolution, the fps and max bit rate the more clarity the picture will be and subsequently better digital zooming.Moreover as already stated if Audio works with VLC then it's not a Reolink issue. But I cannot state eith certainly why it is not being decoded by ZM. There must be some bits ZM is not understanding. BTW what was Reolink support reply? Try to contact them. Maybe someone else raised it up and have a solution. I am a customer.....
@bigblue007_631330884632579 The official one is the one provided by Reolink download center and so one has to adhere to the product owner site. Reolink will not be held responsible if one applies the firmware from third party sites and damage the unit. For instance they have pulled out the last two doorbell firmware so as not to cause issues until a more robust firmware is available. Personally I won't ever apply a firmware of a product from third party site.
@user_655104416477196_655104416477196 Yes, I came across this some time ago on Reddit. Ensure that the firmware loaded is the one corresponding to the HW version.
@kweckstrom_652263608210296 This uses the well-known H.264 codec for video compression. Check that you have the latest ZM.
@tomyafxone_262709326098680 Wonderful.... Grappa please....enjoy
@kweckstrom_652263608210296 yes for rtmp try to add credentials twice as per my format. If you receive the audio on VLC then ZM seems to have an issue in decoding h265. Pls check h265 decoder in ZM. Codec h.265 is not free and it is recently that Chrome supports this codec. I had a quick look and there seems to be an issue with ZM using codec h265. Check whether this is solved in the recent ZM version.
@tomyafxone_262709326098680 click on the wheel at the top right hand corner on the Windows Client.Once disabled, exit and re-run appl.
@user_683244414582984_683244414582984 It's the battery I think. But yes opt for a better one with AI.
@jlj semble un problème de NVR et garantit un remplacement, surtout s'il est toujours sous garantie.
@arestis_676622578688071 Did you email reolink support to see if they have a newer firmware? Last one released was on 09.12.2022.
@shawn-mcgough_652761003406582 Your NVR firmware is rather old. The current version is v3.3.0.226_23031609.
@jedi2020_32727772450952 You need to go to the Expo.................
@jlj jetez un oeil à ceci https://www.reddit.com/r/reolinkcam/comments/zhktis/firmware_archive/Lisez attentivement les instructions et en cas de doute, mieux vaut attendre la réponse du support.
@user_684398941024481_684398941024481 Scheduling within Detection zone functionality hasn't yet been implemented on any of their cameras. I did request this for some time but didn't get any feedback.Note that i use detection zone on Argus 3 Pro for persons and it works super.
Welcome Back!
Hi there! Join the Commnunity to get all the latest news, tips and more!