Posts made by joseph_1979

@user_640575275909212_640575275909212 Yours answers can be found in the following url https://m.reolink.com/product/reolink-go-plus/?gclid=EAIaIQobChMIn6TSy9D8-wIVldJ3Ch3g8AYUEAAYAiAAEgIjP_D_BwE

@mayalynn_312321286320317 IR light reflecting off the water vapour.

@user_640589945716798_640589945716798 Kindly note that Reolink cameras support FTP and FTPS. SFTP is not supported. You can use Cerberus FTP server for file transfer using FTPS.

@user_617650665832448_617650665832448 Under Push and Email (if used) untag any motion. Just detect person, vehicle and pet. And if there are false alarms on person use the alarm delay under alarm settings.

@reolink-fiona Would say that with the TrackMix models Reolink has continued to churn out truly innovative security camera products customers have been waiting for. Thumb Up Reolink.

@sidewayswalking_374465193087231 just create a bottle and install Windows Client and voila' as an interim solution. But hopefully one day we will get the Linux version too.

@joseph-chircop_497308027822318 Update: the audio issue I outlined hereunder has been sorted out in the next release of the Android client. They added the volume control.

@lynnelko88_536587443753194 If it is installed go to setting, applications and find reolink. Click on it and click on storage. Click on clear data and clear cache. Go back and uninstall reolink client. Then install it again and check whether there is any request for password. Of course you have to start from scratch as you need to add cams again. But it is not a big deal unless you have tens of cameras.

@salamanteri_635967195598951 According to its specs, only auto tracking is available. And it seems that cloud storage is only supported on the TrackMix battery operated camera model. Maybe Fiona can provide the reason why this is not available on the other TrackMix models.

@info_526910647251162 Yes, this is missing together with the capability of using the existing chime. It should provide a loop for the existing chime to sound.

@user_639574029807723_639574029807723 Argus 2...is a WIFI battery operated cam and so no need of POE. POE stands for power over Ethernet...a cable which runs between a switch or a router to an ethernet port of the camera side and provides power and allows data to flow in both directions. Argus 2 works only on 2.4G WIFI band so ensure you select the SSID belonging to 2.4G.

@user_639574029807723_639574029807723 Definitely there are lots of users who have connected Reolink cams to Starlink. If your cam is POE then you need the optional adapter.

@adsdslandicas_607820684710066 With that requirements there is only one option............have a chair, a bottle of fine wine and watch out. Joking. So if there is no power then you need a camera charged through a solar panel. Reolink offered a range of battery operated cameras all of which can be charged through a solar panel (around 30 bucks). But battery operated cameras cannot operate continuously but are activated when an event is detected (vehicle, person, pet or any motion). This, of course, impose a limit on the detection range provided by the PIR. It's around 33 feet (10m). Again all the cameras support SD with capacity up to 256GB. If the camera is not triggered often this means months of storage. Now comes the issue for you. You can configure it at home where you have Internet and check that camera is recording, etc. After you install it on-site how can you ensure that it is working correctly since you have no WIFI and you don't want to have mobile connectivity. Even so if it is recording then you need to pull out the SD card and have a PC to view the recorded videos. This is really impractical. You definitely need a camera with SIM and Reolink have them. Now you need to weigh whether to spend a few bucks to get a data SIM or someone stolen your cows and you get notice the next day you visit your farm :).

@reolink-fiona Can you please check whether 4.35.0.5 is available for testing? Appreciate if users are notified of updates and bugs solved.

@olive_608518832963622 that's the first implementation of Reolink doorbell. SIP calling will come too hopefully.

@user_637644440174696_637644440174696 The request is from the above user who wants to connect the NVR to the internet and there is no copper and fibre. So I propose him to use a 4G router.

@keithsrobertson Thanks and appreciated.

@keithsrobertson Excellent. Can you please report it to Reolink support citing your graphic driver version? This seems to be one of the big problems with this client.

@keithsrobertson Did you get the same issue with ver 8.8.2? Can you switch on the hardware decoding first and try to take another snapshot? My Argus 3 Pro is on the same firmware and have no issue. For sure its the interaction between the client and the graphic drivers.

@user_594027275649135_594027275649135 You're welcome. Reolink support notified.