Posts made by joseph_1979

@paulo-medronho_333759811444978 We have been asking for extensive IFTTT, MQTT or matter for some years now. Don't know what are their priorities.

You can achieve this through HA.

@plzm_766272603574456 Try to enable ftp at the camera side based on events.

@user_896044068634806_896044068634806 This is normal if it is new. Just leave it for two days and it will not appear again. I had it on two cameras but thereafter it's gone.

@wrayman_876129870414024 Not yet available and you may ask support to see if they will implement it or not. We have requested this but we never get any feedback.

A cheaper option would be to buy a timer plug socket at 3 Euro.

@user_882627759206608_882627759206608 WIFI cam and HA should be on the same network.

@lorenz-eisermann_361952908566762 Email support and ask them if they can provide the fw upgrade to integrate with the Home Hub. Email is support @ reolink . com

@monkey_814951309963472 Under Display/Advanced, try to change the Black/While and color switching threshold.

See https://support.reolink.com/hc/en-us/articles/10304740093337-Introduction-to-the-Status-Light-of-Video-Doorbell-Cameras/

@john_520498202652923 I wasn't aware of this. I do not have any NVR, just some cameras from Reolink. I use HA and ftping files to an ftp server.

@bkj2024_891124536156382 You definitely need HDR. But Reolink doorbells lack this great feature. You may add an IR illuminator or a motion activated light to illuminate the covered porch.

Are you able to move the camera outside the porch?

@john_520498202652923 I have never came across anyone integrating cameras from other suppliers using Reolink NVR.

@chopstix_887064913674433 You seem to be knowledgeable about their products and if I am Reolink Admin I will certainly ask you to be a moderator to assist customers. However, I am just a customer as you and have no authority. And I do not have so much free time as I am very busy with mega IMS projects.

@archied_538841151893636 For Reolink NVR, launch Reolink Client and log in to the NVR, then go to Device Settings > System > Info. You will see the Model, UID, and Hardware No. and Firmware Version for NVRs.

Have a look at https://support.reolink.com/hc/en-us/articles/360005091374-How-to-Expand-the-Capacity-of-Reolink-NVRs/

RLC-823S1 Check this link https://www.reddit.com/r/reolinkcam/comments/1e3j0wa/found_junction_box_for_rlc823s2_camera/

@lorenz-eisermann_361952908566762 Check this link https://support.reolink.com/hc/en-us/articles/32379509281561-Reolink-Home-Hub-Compatibility/

@chopstix_887064913674433 Ask the admin :). Even me sometimes had to re-type as I got error after clicking submit. They did this limit to avoid scams.

@archied_538841151893636 For RLN8-410 with hardware No. H3MB16 / H3MB02, the single HDD capacity is up to 4TB, in total up to 8TB. For the RLN8-410 with hardware No. H3MB18 / N2MB02 / N3MB01, the single HDD capacity is up to 6TB, in total up to 12 TB.

If you install higher capacity HDD then you might not be able to watch clips which have been written in the excess sectors.

@user_667438141866051_667438141866051 I have requested this for more than 2 years ago. Still waiting :).

@vodkan_410792752525441 So what I can suggest you is to connect its 5V dc adapter to the socket outlet with a timer. The program the timer to switch on for 2 hours daily.

@vodkan_410792752525441 I am not aware that such a skin is available for the Atlas PT. Normally this is hooked to a solar panel. Keeping the camera connected to power supply is not healthy for the batteries.