Posts made by joseph_1979

@user_789904252731581_789904252731581 maybe through RTSP.

@user_788126889066636_788126889066636 You need to be in clear mode before downloading.

@user_746623229407444_746623229407444 So far nothing. We are all waiting to test out the calling feature.

@user_594808079581271_594808079581271 Check my post at https://community.reolink.com/topic/6925/pc-client-v8-14-0/6?post_id=26768&_=1707585752883

@pjsmit_155286146154639 On the RLC811WA it is working similar to the RLC511WA. I don't get any alert from the non detection zone. The only false alert it generates is when getting dark if you have any motion activated. But if you use AI then this disappears. Continue pressing support for a new firmware.

@mig-s_788921991717021 This has been requested for quite some time. It should be across all cameras and not just the doorbell. Admin should assign any privilege to any user.

@user_788661826474175_788661826474175 I don't have this type of camera. I suggest you to email support on support @ reolink . Com (delete spaces).

@user_646334487146521_646334487146521 I have experienced this on another model but for the detrction type being any motion. I disabled any motion and it was fine. Can you increase the alarm delay by 1s and check again?

@user_789384361566395_789384361566395 Under recording and push notification schedule, disable 'others'.

If you turn off PIR, camera won't detect anything.

@user_789384361566395_789384361566395 Disable any motion and use AI detection.

@iallinoro_169065503625461 Just for a test. Can you go to Nvidia Control Panel then Manage Display Mode and select Nvidia GPU only? Can you view live streams now?

@user_788975327735961_788975327735961 Extend your warranty ... I don't have it. Just extend fir one camera and will disappear. And for the capture...I don't mind as long as it is their product. Its nice to know what is available. Whenever I open the application it goes to my main door camera and so I never see such ads.

@useless-box-reo_491212164313322 You're welcome. Same SD module.

@useless-box-reo_491212164313322 128GB as per its specs at https://m.reolink.com/product/argus-3/#specifications

@user_767315643302074_767315643302074 The detection is based on PIR which has a range of around 10m (when set to max sensitivity). In your case the object is out of the detection IR pattern of the PIR and subsequently the camera will not continue to record. But if you stay within the detected range then it should continue to record.

@user_788975327735961_788975327735961 Which Ads? I am running both Windows and Android clients and never saw any ad. Which version are you running?

@pjsmit_155286146154639 I am still away. Camera should be installed at 2.7m above ground to detect human correctly. So if this is not the case then you will definitely miss detections. And if the new fw didn't solve your issue then you need to keep pressing Reolink support for a solution.

@george-winston_462886334173375 Good to hear that. Enjoy. Hopefully Reolink will release the new fw of the doorbell which shall allow calling when visitor button is pressed.

@user_661794270740568_661794270740568 So this appears on both Android and Windows clients. If so then try to reset camera?

@user_784282903113934_784282903113934 There is no restrictions on password characters as stated in https://support.reolink.com/hc/en-us/articles/900000585986-What-is-the-Requirements-of-the-Protection-Password-for-Reolink-Client/#:~:text=Applies%20to%3A%20All%20Reolink%20cameras,no%20restrictions%20on%20special%20characters.

Basically the WPA2 is the security protocol and the encryption methods are TKIP and AES, each of which uses a shared key.