Posts made by joseph_1979

@user_655104416477196_655104416477196 Yes, I came across this some time ago on Reddit. Ensure that the firmware loaded is the one corresponding to the HW version.

@kweckstrom_652263608210296 This uses the well-known H.264 codec for video compression. Check that you have the latest ZM.

@tomyafxone_262709326098680 Wonderful.... Grappa please....enjoy

@kweckstrom_652263608210296 yes for rtmp try to add credentials twice as per my format. If you receive the audio on VLC then ZM seems to have an issue in decoding h265. Pls check h265 decoder in ZM.

Codec h.265 is not free and it is recently that Chrome supports this codec. I had a quick look and there seems to be an issue with ZM using codec h265. Check whether this is solved in the recent ZM version.

@tomyafxone_262709326098680 click on the wheel at the top right hand corner on the Windows Client.

Once disabled, exit and re-run appl.

@user_683244414582984_683244414582984 It's the battery I think. But yes opt for a better one with AI.

@jlj semble un problème de NVR et garantit un remplacement, surtout s'il est toujours sous garantie.

@arestis_676622578688071 Did you email reolink support to see if they have a newer firmware? Last one released was on 09.12.2022.

@shawn-mcgough_652761003406582 Your NVR firmware is rather old. The current version is v3.3.0.226_23031609.

@jedi2020_32727772450952 You need to go to the Expo.................

@jlj jetez un oeil à ceci https://www.reddit.com/r/reolinkcam/comments/zhktis/firmware_archive/

Lisez attentivement les instructions et en cas de doute, mieux vaut attendre la réponse du support.

@user_684398941024481_684398941024481 Scheduling within Detection zone functionality hasn't yet been implemented on any of their cameras.

I did request this for some time but didn't get any feedback.

Note that i use detection zone on Argus 3 Pro for persons and it works super.

@user_684398941024481_684398941024481 This is one year old and generic. Old cameras like Argus 2 don't have detection zones. But I gave you a screenshot from my Argus 3 Pro which is the one you are interested in.

Have a look at this URL https://support.reolink.com/hc/en-us/articles/6811055940249-How-to-Set-up-Detection-Zone-for-Battery-powered-Cameras-via-Reoink-App/

@user_684398941024481_684398941024481 Argus 3 Pro supports detection zone per object type (motion, person, vehicle and pet).

@brett-hyink_464759829713142 I have no issue to view my cameras through my 4Gand 5G smartphones. It not only depends on Reolink but there is also the WIFI at home, the copper or fibre path from home to the BB service provider, routing within its IP Core backbone, the interconnect from this ISP to the mobile operator IP backbone, from the mobile operator IP backbone to its Packet core (MME, SGW, PGW), from its Packet core to its Radio network and from the Radio network to your smartphone.

@jlj Si vous l'avez acheté en tant que système, ils n'ont probablement pas d'UID et vous ne pouvez donc pas les installer indépendamment.

@jlj Vous devez envoyer un e-mail à l'assistance reolink en indiquant votre version matérielle du NVR

@jlj
Si les caméras sont connectées à un commutateur POE, vous pouvez utiliser l'UID pour y accéder à partir du client Android/Windows. Si ce n'est pas le cas, il se peut que les caméras n'aient pas l'UID et dans ce cas, vous devez utiliser l'adresse IP attribuée. Si vous ne pouvez pas le faire, je vous suggère de revenir au micrologiciel précédent et d'envoyer un e-mail à l'assistance Reolink pour une enquête plus approfondie.

@kweckstrom_652263608210296 DUO 2 uses H.265 codec for high definition (> 1440p) and so you need to use the following URLs.

Main Stream: rtsp://admin:password@192.168.1.196:554/h265Preview_01_main
Sub Stream:  rtsp://admin:password@192.168.1.196:554/h264Preview_01_sub

Use VLC and check you have both Video and Audio in both streams.

Also make sure you have RTSP turned on under Network Settings > Advanced > Port Settings > Set Up > Enable RTSP and Save. It's off by default.

To use RTMP you need to install the 3rd party software such as OBS or Streamlabs which shall allow you to remotely watch the live feed from your security camera or share the YouTube live stream to the rest of the world, or if you have a website, you can even embed the live stream on your website. In case of you tube you need the stream key which can be generated from your youtube account.

rtmp://admin:admin@192.168.1.196:1935/bcs/channel0_main.bcs?token=[TOKEN]&channel=0&stream=0&user=admin&password=admin

@jlj Check that you have the latest firmware on the RLC-812-A. Sometimes the one shown on the site is not the newest and so I suggest you to email reolink support.